[Smartmontools-database] Transcend CF220I Industrial CompactFlash Card
Waldmann, Holger
holger.waldmann at siemens.com
Fri Jan 14 15:06:45 CET 2022
The output was done with the patch already in place.
A link to the original datasheet is provided as comment in the patch.
Best regards
Holger
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://listi.jpberlin.de/pipermail/smartmontools-database/attachments/20220114/adfdb6b3/attachment-0001.htm>
-------------- next part --------------
{ "Transcend CF220I Industrial CompactFlash Card",
// spec v1.2 found at https://docs.rs-online.com/8b3f/0900766b81540cdc.pdf
// tested with TS4GCF220I-P
"TS(1|2|4|8|16|32)GCF220I(-P)?",
"", "",
//"-v 1,raw48,Raw_Read_Error_Rate "
//"-v 5,raw16(raw16),Reallocated_Sector_Ct "
//"-v 12,raw48,Power_Cycle_Count "
"-v 160,raw48,Uncorrectable_Error_Cnt "
"-v 161,raw48,Valid_Spare_Block_Cnt "
"-v 162,raw48,Child_Pair_Count "
"-v 163,raw48,Initial_Bad_Block_Count "
"-v 164,raw48,Total_Erase_Count "
"-v 165,raw48,Max_Erase_Count "
"-v 166,raw48,Min_Erase_Count "
"-v 167,raw48,Average_Erase_Count "
//"-v 192,raw48,Power-Off_Retract_Count "
//"-v 194,tempminmax,Temperature_Celsius "
//"-v 195,raw48,Hardware_ECC_Recovered "
//"-v 196,raw16(raw16),Reallocated_Event_Count "
//"-v 198,raw48,Offline_Uncorrectable "
//"-v 199,raw48,UDMA_CRC_Error_Count "
"-v 241,raw48,Host_Writes_32MiB "
"-v 242,raw48,Host_Reads_32MiB"
},
-------------- next part --------------
smartctl 7.1 2019-12-30 r5022 [armv7l-linux-5.4.0-1048-raspi] (local build)
Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Transcend CF220I Industrial CompactFlash Card
Device Model: TS4GCF220I-P
Serial Number: D5789902053292300188
Firmware Version: 20150912
User Capacity: 4,076,642,304 bytes [4.07 GB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: [No Information Found]
Local Time is: Fri Jan 14 13:18:56 2022 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM feature is: Disabled
Rd look-ahead is: Unavailable
Write cache is: Disabled
DSN feature is: Unavailable
ATA Security is: Disabled, NOT FROZEN [SEC1]
Wt Cache Reorder: Unavailable
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x02) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Disabled.
Total time to complete Offline
data collection: ( 1) seconds.
Offline data collection
capabilities: (0x00) Offline data collection not supported.
SMART capabilities: (0x0002) Does not save SMART data before
entering power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x00) Error logging NOT supported.
No General Purpose Logging support.
SMART Attributes Data Structure revision number: 1
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate ------ 100 100 050 - 0
5 Reallocated_Sector_Ct ------ 100 100 050 - 0
12 Power_Cycle_Count ------ 100 100 050 - 884
160 Uncorrectable_Error_Cnt ------ 100 100 050 - 0
161 Valid_Spare_Block_Cnt ------ 100 100 050 - 35
162 Child_Pair_Count ------ 100 100 050 - 21
163 Initial_Bad_Block_Count ------ 100 100 050 - 21
164 Total_Erase_Count ------ 100 100 050 - 344983
165 Max_Erase_Count ------ 100 100 050 - 385
166 Min_Erase_Count ------ 100 100 050 - 312
167 Average_Erase_Count ------ 100 100 050 - 338
192 Power-Off_Retract_Count ------ 100 100 050 - 0
194 Temperature_Celsius ------ 100 100 000 - 37 (Min/Max 20/73)
195 Hardware_ECC_Recovered ------ 100 100 050 - 0
196 Reallocated_Event_Count ------ 100 100 050 - 0
198 Offline_Uncorrectable ------ 100 100 050 - 0
199 UDMA_CRC_Error_Count ------ 100 100 050 - 0
241 Host_Writes_32MiB ------ 100 100 050 - 4938
242 Host_Reads_32MiB ------ 100 100 050 - 32956
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
Read SMART Log Directory failed: Success
General Purpose Log Directory not supported
SMART Extended Comprehensive Error Log (GP Log 0x03) not supported
SMART Error Log not supported
SMART Extended Self-test Log (GP Log 0x07) not supported
SMART Self-test Log not supported
Selective Self-tests/Logging not supported
SCT Commands not supported
Device Statistics (GP/SMART Log 0x04) not supported
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11) not supported
More information about the Smartmontools-database
mailing list