[Smartmontools-database] Netac N600S
Roman Petrov
romanpetrov87 at gmail.com
Wed Aug 17 18:00:31 CEST 2022
-----
С уважением,
Роман Петров
romanpetrov87 at gmail.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://listi.jpberlin.de/pipermail/smartmontools-database/attachments/20220817/aa2d5cfa/attachment.htm>
-------------- next part --------------
smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.15.0-46-generic] (local build)
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: Netac SSD 128GB
Firmware Version: SN6201
User Capacity: 128 035 676 160 bytes [128 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
Form Factor: M.2
TRIM Command: Available, zeroed
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: ACS-2 (minor revision not indicated)
SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Wed Aug 17 18:54:26 2022 MSK
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM feature is: Unavailable
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Disabled
ATA Security is: Disabled, frozen [SEC2]
Wt Cache Reorder: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 33) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 2) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x0031) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 20
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
9 Power_On_Hours -O--C- 100 100 000 - 3
12 Power_Cycle_Count -O--C- 100 100 000 - 12
167 Unknown_Attribute -O---K 100 100 000 - 0
168 Unknown_Attribute -O--C- 100 100 000 - 0
169 Unknown_Attribute PO--C- 100 100 010 - 983066
171 Unknown_Attribute -O--CK 000 000 000 - 0
172 Unknown_Attribute -O--CK 000 000 000 - 0
173 Unknown_Attribute -O--C- 200 200 000 - 4295098369
175 Program_Fail_Count_Chip -O---K 100 100 010 - 0
180 Unused_Rsvd_Blk_Cnt_Tot PO--CK 100 100 000 - 109
187 Reported_Uncorrect -O--CK 100 000 000 - 0
192 Power-Off_Retract_Count -O--C- 100 100 000 - 7
194 Temperature_Celsius -O---K 031 031 000 - 31 (Min/Max 26/36)
206 Unknown_SSD_Attribute -O--CK 200 200 000 - 1
207 Unknown_SSD_Attribute -O--CK 200 200 000 - 2
208 Unknown_SSD_Attribute -O--CK 200 200 000 - 1
209 Unknown_SSD_Attribute -O--CK 200 200 000 - 1
210 Unknown_Attribute -O--CK 200 200 000 - 3
211 Unknown_Attribute -O--CK 200 200 000 - 1
231 Unknown_SSD_Attribute PO---K 100 100 005 - 0
233 Media_Wearout_Indicator -O--CK 100 100 000 - 0
234 Unknown_Attribute -O--CK 100 100 000 - 9485232
241 Total_LBAs_Written -O--CK 100 100 000 - 63504621
242 Total_LBAs_Read -O--CK 100 100 000 - 9250387
243 Unknown_Attribute -O--CK 050 050 000 - 0
245 Unknown_Attribute -O--CK 100 100 000 - 35
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 51 Comprehensive SMART error log
0x03 GPL R/O 64 Ext. Comprehensive SMART error log
0x04 GPL,SL R/O 8 Device Statistics log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 1 Extended self-test log
0x09 SL R/W 1 Selective self-test log
0x0a GPL R/W 2 Device Statistics Notification
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (64 sectors)
No Errors Logged
SMART Extended Self-test Log Version: 1 (1 sectors)
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 3 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 3
SCT Version (vendor specific): 1 (0x0001)
Device State: Active (0)
Current Temperature: 36 Celsius
Power Cycle Min/Max Temperature: ?/36 Celsius
Lifetime Min/Max Temperature: ?/ ? Celsius
Under/Over Temperature Limit Count: 0/0
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 1 minute
Min/Max recommended Temperature: -127/127 Celsius
Min/Max Temperature Limit: -127/127 Celsius
Temperature History Size (Index): 478 (33)
Index Estimated Time Temperature Celsius
34 2022-08-17 10:57 ? -
... ..(445 skipped). .. -
2 2022-08-17 18:23 ? -
3 2022-08-17 18:24 32 *************
4 2022-08-17 18:25 ? -
5 2022-08-17 18:26 ? -
6 2022-08-17 18:27 ? -
7 2022-08-17 18:28 35 ****************
8 2022-08-17 18:29 ? -
... ..( 3 skipped). .. -
12 2022-08-17 18:33 ? -
13 2022-08-17 18:34 36 *****************
14 2022-08-17 18:35 34 ***************
15 2022-08-17 18:36 ? -
... ..( 5 skipped). .. -
21 2022-08-17 18:42 ? -
22 2022-08-17 18:43 34 ***************
23 2022-08-17 18:44 33 **************
24 2022-08-17 18:45 33 **************
25 2022-08-17 18:46 33 **************
26 2022-08-17 18:47 ? -
27 2022-08-17 18:48 ? -
28 2022-08-17 18:49 32 *************
29 2022-08-17 18:50 34 ***************
30 2022-08-17 18:51 34 ***************
31 2022-08-17 18:52 32 *************
32 2022-08-17 18:53 36 *****************
33 2022-08-17 18:54 36 *****************
SCT Error Recovery Control command not supported
Device Statistics (GP Log 0x04)
Page Offset Size Value Flags Description
0x01 ===== = = === == General Statistics (rev 1) ==
0x01 0x008 4 12 -D- Lifetime Power-On Resets
0x01 0x010 4 3 -D- Power-on Hours
0x01 0x018 6 63504621 -D- Logical Sectors Written
0x01 0x020 6 2696846 -D- Number of Write Commands
0x01 0x028 6 9250387 -D- Logical Sectors Read
0x01 0x030 6 130719 -D- Number of Read Commands
0x01 0x038 6 4087200 -D- Date and Time TimeStamp
0x07 ===== = = === == Solid State Device Statistics (rev 1) ==
0x07 0x008 1 0 ND- Percentage Used Endurance Indicator
|||_ C monitored condition met
||__ D supports DSN
|___ N normalized value
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 2 0 Command failed due to ICRC error
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
0x0008 2 0 Device-to-host non-data FIS retries
0x0009 4 0 Transition from drive PhyRdy to drive PhyNRdy
0x000a 4 22 Device-to-host register FISes sent due to a COMRESET
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC
0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC
More information about the Smartmontools-database
mailing list