[Smartmontools-database] Adding to database
Meinolf Müller
meinolf.muller at gmail.com
Tue Sep 21 11:28:27 CEST 2021
Reagards
Meinolf Müller
-------------- next part --------------
smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.4.0-84-generic] (local build)
Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: SAMSUNG MZHPU512HCGL-00004
Serial Number: S1NDNYAF802413
LU WWN Device Id: 5 002538 600040301
Firmware Version: UXM6601Q
User Capacity: 512 110 190 592 bytes [512 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4c
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Tue Sep 21 11:14:00 2021 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM feature is: Unavailable
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, frozen [SEC2]
Unexpected SCT status 0x0001 (action_code=4, function_code=2)
Wt Cache Reorder: Unknown (SCT Feature Control command failed)
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 0) seconds.
Offline data collection
capabilities: (0x5f) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Abort Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 10) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 1
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
9 Power_On_Hours -O--CK 092 092 000 - 37934
12 Power_Cycle_Count -O--CK 096 096 000 - 3538
177 Wear_Leveling_Count PO--C- 089 089 017 - 383
178 Used_Rsvd_Blk_Cnt_Chip PO--C- 092 092 010 - 406
179 Used_Rsvd_Blk_Cnt_Tot PO--C- 092 092 010 - 770
180 Unused_Rsvd_Blk_Cnt_Tot PO--C- 092 092 010 - 9726
183 Runtime_Bad_Block PO--C- 100 100 010 - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 1 Comprehensive SMART error log
0x03 GPL R/O 2 Ext. Comprehensive SMART error log
0x04 GPL,SL R/O 8 Device Statistics log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 2 Extended self-test log
0x09 SL R/W 1 Selective self-test log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x1c GPL - 32768 Reserved
0x20 GPL R/O 7 Streaming performance log [OBS-8]
0x28 GPL - 32768 Reserved
0x34 GPL - 32768 Reserved
0x40 SL - 1 Reserved
0x4c GPL - 32768 Reserved
0x54 SL - 1 Reserved
0x58 GPL - 32768 Reserved
0x64 GPL - 32768 Reserved
0x68 SL - 1 Reserved
0x7c SL - 1 Reserved
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xa0 SL VS 1 Device vendor specific log
0xa4 SL VS 1 Device vendor specific log
0xaf SL VS 158 Device vendor specific log
0xc0 GPL VS 32768 Device vendor specific log
0xd9 GPL VS 127 Device vendor specific log
0xec GPL,SL - 129 Reserved
0xf8 GPL - 128 Reserved
SMART Extended Comprehensive Error Log Version: 1 (2 sectors)
No Errors Logged
SMART Extended Self-test Log Version: 1 (2 sectors)
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 0 -
# 2 Short offline Completed without error 00% 0 -
# 3 Short offline Completed without error 00% 26 -
# 4 Short offline Completed without error 00% 5 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 3
SCT Version (vendor specific): 1 (0x0001)
Device State: Active (0)
Current Temperature: 27 Celsius
Power Cycle Min/Max Temperature: ?/ ? Celsius
Lifetime Min/Max Temperature: ?/ ? Celsius
Under/Over Temperature Limit Count: 0/216192
SCT Temperature History Version: 2
Temperature Sampling Period: 10 minutes
Temperature Logging Interval: 10 minutes
Min/Max recommended Temperature: ?/ ? Celsius
Min/Max Temperature Limit: ?/ ? Celsius
Temperature History Size (Index): 128 (2)
Index Estimated Time Temperature Celsius
3 2021-09-20 14:00 ? -
... ..(124 skipped). .. -
0 2021-09-21 10:50 ? -
1 2021-09-21 11:00 24 *****
2 2021-09-21 11:10 25 ******
SCT Error Recovery Control:
Read: Disabled
Write: Disabled
Device Statistics (GP Log 0x04)
Page Offset Size Value Flags Description
0x01 ===== = = === == General Statistics (rev 2) ==
0x01 0x008 4 3538 --- Lifetime Power-On Resets
0x01 0x010 4 37934 --- Power-on Hours
0x01 0x018 6 152802578434 --- Logical Sectors Written
0x01 0x020 6 588262437 --- Number of Write Commands
0x01 0x028 6 144167321122 --- Logical Sectors Read
0x01 0x030 6 830516904 --- Number of Read Commands
0x04 ===== = = === == General Errors Statistics (rev 1) ==
0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors
0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion
0x06 ===== = = === == Transport Statistics (rev 1) ==
0x06 0x008 4 0 --- Number of Hardware Resets
0x06 0x010 4 0 --- Number of ASR Events
0x06 0x018 4 0 --- Number of Interface CRC Errors
0x07 ===== = = === == Solid State Device Statistics (rev 1) ==
0x07 0x008 1 0 N-- Percentage Used Endurance Indicator
|||_ C monitored condition met
||__ D supports DSN
|___ N normalized value
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 4 0 Command failed due to ICRC error
0x000a 4 3 Device-to-host register FISes sent due to a COMRESET
More information about the Smartmontools-database
mailing list