From an07her123 at gmail.com Fri Oct 15 02:57:04 2021 From: an07her123 at gmail.com (Anothercho) Date: Fri, 15 Oct 2021 01:57:04 +0100 Subject: [Smartmontools-database] WDC WD80EFBX-68AZZN0 Message-ID: This is the Oct 2020 new version of WD Red Plus with updated firmware and model number that shows the actual 7200rpm speed after yet another recent controversy . R/N: US7SAN8T0 corresponds to Ultrastar DC HC320 -------------- next part -------------- An HTML attachment was scrubbed... URL: -------------- next part -------------- smartctl 7.3 2021-09-14 r5236 [x86_64-w64-mingw32-w10-21H1] (CircleCI) Copyright (C) 2002-21, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: WDC WD80EFBX-68AZZN0 Firmware Version: 85.00A85 User Capacity: 8,001,563,222,016 bytes [8.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 7200 rpm Form Factor: 3.5 inches Device is: Not in smartctl database 7.2/5236 ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Fri Oct 15 01:44:42 2021 GMTDT SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 164 (intermediate level without standby) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x80) Offline data collection activity was never started. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 87) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 812) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 0 2 Throughput_Performance --S--- 129 129 054 - 106 3 Spin_Up_Time POS--- 100 100 024 - 0 4 Start_Stop_Count -O--C- 100 100 000 - 6 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 7 Seek_Error_Rate -O-R-- 100 100 067 - 0 8 Seek_Time_Performance --S--- 128 128 020 - 18 9 Power_On_Hours -O--C- 100 100 000 - 34 10 Spin_Retry_Count -O--C- 100 100 060 - 0 12 Power_Cycle_Count -O--CK 100 100 000 - 6 192 Power-Off_Retract_Count -O--CK 100 100 000 - 10 193 Load_Cycle_Count -O--C- 100 100 000 - 10 194 Temperature_Celsius -O---- 147 147 000 - 44 (Min/Max 22/47) 196 Reallocated_Event_Count -O--CK 100 100 000 - 0 197 Current_Pending_Sector -O---K 100 100 000 - 0 198 Offline_Uncorrectable ---R-- 100 100 000 - 0 199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 1 Comprehensive SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x04 GPL R/O 256 Device Statistics log 0x04 SL R/O 255 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x08 GPL R/O 2 Power Conditions log 0x09 SL R/W 1 Selective self-test log 0x0c GPL R/O 5501 Pending Defects log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x12 GPL R/O 1 SATA NCQ Non-Data log 0x13 GPL R/O 1 SATA NCQ Send and Receive log 0x15 GPL R/W 1 Rebuild Assist log 0x21 GPL R/O 1 Write stream error log 0x22 GPL R/O 1 Read stream error log 0x24 GPL R/O 256 Current Device Internal Status Data log 0x25 GPL R/O 256 Saved Device Internal Status Data log 0x2f GPL - 1 Set Sector Configuration 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (1 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 27 - # 2 Short offline Completed without error 00% 10 - # 3 Short offline Completed without error 00% 0 - # 4 Short offline Completed without error 00% 0 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 256 (0x0100) Device State: Active (0) Current Temperature: 44 Celsius Power Cycle Min/Max Temperature: 23/46 Celsius Lifetime Min/Max Temperature: 22/47 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/65 Celsius Min/Max Temperature Limit: -40/70 Celsius Temperature History Size (Index): 128 (51) Index Estimated Time Temperature Celsius 52 2021-10-14 23:37 45 ************************** ... ..( 12 skipped). .. ************************** 65 2021-10-14 23:50 45 ************************** 66 2021-10-14 23:51 46 *************************** ... ..( 49 skipped). .. *************************** 116 2021-10-15 00:41 46 *************************** 117 2021-10-15 00:42 45 ************************** ... ..( 33 skipped). .. ************************** 23 2021-10-15 01:16 45 ************************** 24 2021-10-15 01:17 44 ************************* 25 2021-10-15 01:18 44 ************************* 26 2021-10-15 01:19 45 ************************** 27 2021-10-15 01:20 44 ************************* 28 2021-10-15 01:21 44 ************************* 29 2021-10-15 01:22 45 ************************** 30 2021-10-15 01:23 45 ************************** 31 2021-10-15 01:24 44 ************************* 32 2021-10-15 01:25 44 ************************* 33 2021-10-15 01:26 45 ************************** 34 2021-10-15 01:27 44 ************************* 35 2021-10-15 01:28 44 ************************* 36 2021-10-15 01:29 45 ************************** 37 2021-10-15 01:30 44 ************************* ... ..( 12 skipped). .. ************************* 50 2021-10-15 01:43 44 ************************* 51 2021-10-15 01:44 45 ************************** SCT Error Recovery Control: Read: 70 (7.0 seconds) Write: 70 (7.0 seconds) Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 6 --- Lifetime Power-On Resets 0x01 0x010 4 34 --- Power-on Hours 0x01 0x018 6 3624821318 --- Logical Sectors Written 0x01 0x020 6 14623581 --- Number of Write Commands 0x01 0x028 6 150706821 --- Logical Sectors Read 0x01 0x030 6 683913 --- Number of Read Commands 0x01 0x038 6 1633824026688 --- Date and Time TimeStamp 0x03 ===== = = === == Rotating Media Statistics (rev 1) == 0x03 0x008 4 34 --- Spindle Motor Power-on Hours 0x03 0x010 4 34 --- Head Flying Hours 0x03 0x018 4 10 --- Head Load Events 0x03 0x020 4 0 --- Number of Reallocated Logical Sectors 0x03 0x028 4 0 --- Read Recovery Attempts 0x03 0x030 4 0 --- Number of Mechanical Start Failures 0x04 ===== = = === == General Errors Statistics (rev 1) == 0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors 0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion 0x05 ===== = = === == Temperature Statistics (rev 1) == 0x05 0x008 1 44 --- Current Temperature 0x05 0x010 1 42 N-- Average Short Term Temperature 0x05 0x018 1 - N-- Average Long Term Temperature 0x05 0x020 1 47 --- Highest Temperature 0x05 0x028 1 22 --- Lowest Temperature 0x05 0x030 1 43 N-- Highest Average Short Term Temperature 0x05 0x038 1 25 N-- Lowest Average Short Term Temperature 0x05 0x040 1 - N-- Highest Average Long Term Temperature 0x05 0x048 1 - N-- Lowest Average Long Term Temperature 0x05 0x050 4 0 --- Time in Over-Temperature 0x05 0x058 1 65 --- Specified Maximum Operating Temperature 0x05 0x060 4 0 --- Time in Under-Temperature 0x05 0x068 1 0 --- Specified Minimum Operating Temperature 0x06 ===== = = === == Transport Statistics (rev 1) == 0x06 0x008 4 25 --- Number of Hardware Resets 0x06 0x010 4 8 --- Number of ASR Events 0x06 0x018 4 0 --- Number of Interface CRC Errors 0xff ===== = = === == Vendor Specific Statistics (rev 1) == 0xff 0x040 7 20 --- Vendor Specific 0xff 0x048 7 302 --- Vendor Specific 0xff 0x050 7 0 --- Vendor Specific 0xff 0x058 7 0 --- Vendor Specific 0xff 0x060 7 0 --- Vendor Specific 0xff 0x068 7 0 --- Vendor Specific 0xff 0x070 7 0 --- Vendor Specific 0xff 0x078 7 4 --- Vendor Specific 0xff 0x080 7 332924 --- Vendor Specific |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) No Defects Logged SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 3 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 2 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS From aom9yf2f4wxs at mail.ru Fri Oct 29 12:52:40 2021 From: aom9yf2f4wxs at mail.ru (aom9yf2f4wxs at mail.ru) Date: Fri, 29 Oct 2021 13:52:40 +0300 Subject: [Smartmontools-database] =?utf-8?q?Transcend_TS120GMTS820S_add_t?= =?utf-8?q?o_database?= Message-ID: <1635504760.401023908@f478.i.mail.ru> ? ? ? -------------- next part -------------- An HTML attachment was scrubbed... URL: -------------- next part -------------- An embedded and charset-unspecified text was scrubbed... Name: smartctl-TS120GMTS820S.txt URL: