[Smartmontools-database] SK hynix SC401 SATA 512GB
Tohl AE
tohlae8o at gmail.com
Mon Jun 14 17:42:38 CEST 2021
Greetings.
This drive is not in the smartctl database. Following the steps in the
FAQ,
https://www.smartmontools.org/wiki/FAQ#MyATASATAdriveisnotinthesmartctlsmartddatabase
I'm sending a report which is attached to this message.
Regards
-------------- next part --------------
smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.11.0-18-generic] (local build)
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: SK hynix SC401 SATA 512GB
Firmware Version: 90000121
User Capacity: 512.110.190.592 bytes [512 GB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: Solid State Device
Form Factor: M.2
TRIM Command: Available, deterministic
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: ACS-3 (minor revision not indicated)
SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Mon Jun 14 17:12:16 2021 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM feature is: Unavailable
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, frozen [SEC2]
Wt Cache Reorder: Unavailable
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x02) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 110) seconds.
Offline data collection
capabilities: (0x51) SMART execute Offline immediate.
No Auto Offline data collection support.
Suspend Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0002) Does not save SMART data before
entering power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 80) minutes.
SMART Attributes Data Structure revision number: 0
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate -OSR-- 166 166 006 - 0
5 Reallocated_Sector_Ct PO--CK 100 100 036 - 0
9 Power_On_Hours -O--CK 090 090 000 - 9033
12 Power_Cycle_Count PO--CK 100 100 020 - 687
100 Unknown_Attribute -O--CK 100 100 000 - 747090
168 Unknown_Attribute -O--CK 100 100 000 - 2
169 Unknown_Attribute -O--CK 098 098 000 - 70
174 Unknown_Attribute -O--CK 100 100 000 - 27
175 Program_Fail_Count_Chip PO--CK 100 100 010 - 0
176 Erase_Fail_Count_Chip PO--CK 100 100 010 - 0
177 Wear_Leveling_Count PO--CK 100 100 005 - 20
178 Used_Rsvd_Blk_Cnt_Chip PO--CK 100 100 010 - 19
179 Used_Rsvd_Blk_Cnt_Tot PO--CK 100 100 010 - 32
180 Unused_Rsvd_Blk_Cnt_Tot PO--CK 100 100 010 - 882
181 Program_Fail_Cnt_Total PO--CK 100 100 010 - 0
182 Erase_Fail_Count_Total PO--CK 100 100 010 - 0
184 End-to-End_Error -O--CK 100 100 000 - 17
187 Reported_Uncorrect PO--CK 100 100 001 - 33
188 Command_Timeout -O--CK 100 100 000 - 76
194 Temperature_Celsius -O---K 031 062 000 - 31 (Min/Max 14/62)
195 Hardware_ECC_Recovered PO-R-- 100 085 001 - 0
196 Reallocated_Event_Count -O--CK 100 100 036 - 0
198 Offline_Uncorrectable ----CK 100 100 000 - 112
199 UDMA_CRC_Error_Count PO--CK 100 100 001 - 0
204 Soft_ECC_Correction -OSR-- 001 001 000 - 20452
212 Unknown_Attribute -O--CK 100 100 000 - 5863
234 Unknown_Attribute -O--CK 100 100 000 - 20631424336
238 Unknown_Attribute PO---K 100 100 001 - 100
241 Total_LBAs_Written PO--CK 100 100 001 - 19875085588
242 Total_LBAs_Read PO--CK 100 100 001 - 27471235638
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 4 Comprehensive SMART error log
0x03 GPL R/O 5 Ext. Comprehensive SMART error log
0x04 GPL,SL R/O 8 Device Statistics log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 2 Extended self-test log
0x09 SL R/W 1 Selective self-test log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
SMART Extended Comprehensive Error Log Version: 1 (5 sectors)
No Errors Logged
SMART Extended Self-test Log Version: 1 (2 sectors)
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 9032 -
# 2 Short offline Completed without error 00% 9032 -
# 3 Extended offline Completed without error 00% 9029 -
# 4 Extended offline Completed without error 00% 9028 -
# 5 Short offline Completed without error 00% 9027 -
# 6 Extended offline Aborted by host 60% 6940 -
# 7 Short offline Completed without error 00% 6940 -
# 8 Short offline Completed without error 00% 2 -
Warning! SMART Selective Self-Test Log Structure error: invalid SMART checksum.
SMART Selective self-test log data structure revision number 0
Note: revision number not 1 implies that no selective self-test has ever been run
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Commands not supported
Device Statistics (GP Log 0x04)
Page Offset Size Value Flags Description
0x01 ===== = = === == General Statistics (rev 1) ==
0x01 0x008 4 687 --- Lifetime Power-On Resets
0x01 0x010 4 9033 --- Power-on Hours
0x01 0x018 6 19875085588 --- Logical Sectors Written
0x01 0x020 6 430915454 --- Number of Write Commands
0x01 0x028 6 27471235638 --- Logical Sectors Read
0x01 0x030 6 310590335 --- Number of Read Commands
0x01 0x038 6 1536036332990 --- Date and Time TimeStamp
0x04 ===== = = === == General Errors Statistics (rev 1) ==
0x04 0x008 4 33 --- Number of Reported Uncorrectable Errors
0x04 0x010 4 76 --- Resets Between Cmd Acceptance and Completion
0x05 ===== = = === == Temperature Statistics (rev 1) ==
0x05 0x008 1 31 --- Current Temperature
0x05 0x010 1 31 --- Average Short Term Temperature
0x05 0x018 1 - --- Average Long Term Temperature
0x05 0x020 1 62 --- Highest Temperature
0x05 0x028 1 14 --- Lowest Temperature
0x05 0x030 1 - --- Highest Average Short Term Temperature
0x05 0x038 1 21 --- Lowest Average Short Term Temperature
0x05 0x040 1 - --- Highest Average Long Term Temperature
0x05 0x048 1 26 --- Lowest Average Long Term Temperature
0x05 0x050 4 0 --- Time in Over-Temperature
0x05 0x058 1 80 --- Specified Maximum Operating Temperature
0x05 0x060 4 536280 --- Time in Under-Temperature
0x05 0x068 1 -20 --- Specified Minimum Operating Temperature
0x06 ===== = = === == Transport Statistics (rev 1) ==
0x06 0x008 4 2275 --- Number of Hardware Resets
0x06 0x018 4 0 --- Number of Interface CRC Errors
0x07 ===== = = === == Solid State Device Statistics (rev 1) ==
0x07 0x008 1 0 --- Percentage Used Endurance Indicator
|||_ C monitored condition met
||__ D supports DSN
|___ N normalized value
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 2 0 Command failed due to ICRC error
0x000a 2 7 Device-to-host register FISes sent due to a COMRESET
More information about the Smartmontools-database
mailing list