[Smartmontools-database] SolidForce USB-C to NVMe/SATA M.2 SSD 10Gbps Enclosure Lite

[Skibbi]

I will try to get some SATA drive and test it with it. But I need some time
to get the drive.

Best regards

sob., 30 sty 2021 o 17:43 Skibbi <skibbi at gmail.com> napisał(a):

> Hi,
> It does not support SATA, but perhaps this is because I have an NVMe drive
> in the case.
>
> # smartctl -a /dev/sda -d sat
> smartctl 7.2 2020-12-30 r5155 [armv7l-linux-5.4.83-v7l+] (local build)
> Copyright (C) 2002-20, Bruce Allen, Christian Franke,
> www.smartmontools.org
>
> Read Device Identity failed: scsi error unsupported scsi opcode
>
> A mandatory SMART command failed: exiting. To continue, add one or more
> '-T permissive' options.
>
> Best regards
>
> sob., 30 sty 2021 o 16:46 Christian Franke <Christian.Franke at t-online.de>
> napisał(a):
>
>> Skibbi wrote:
>> >
>> https://www.unitek-products.com/products/solidforce-nvme-sata-enclosure-lite
>> >
>> > The enclosure identifies itself as:
>> > usb 2-2: new SuperSpeed Gen 1 USB device number 3 using xhci_hcd
>> > usb 2-2: New USB device found, idVendor=0bda, idProduct=e19b,
>> > bcdDevice=30.00
>> > usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>> > usb 2-2: Product: RTL9210B-CG
>> > usb 2-2: Manufacturer: Realtek
>> >
>> > smartctl reports:
>> > /dev/sda: Unknown USB bridge [0x0bda:0xe19b (0x3000)]
>> > but after adding -d sntrealtek it works OK.
>> >
>>
>> Thanks!
>>
>> Unfortunately '-d sntrealtek' could not be used unconditionally because
>> the RTL9210B also supports SATA.
>> NVMe/SATA detection is not yet implemented. It would only work if the
>> USB bridge behaves sane if the wrong (SATA instead of NVMe or vice
>> versa) command is issued.
>>
>> Could you possibly test how the enclosure behaves with a SATA device?
>> Does '-d sat' work then?
>>
>> Thanks,
>> Christian
>>
>>
>
> --
> *Pozdrawiam*
>


-- 
*Pozdrawiam*
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://listi.jpberlin.de/pipermail/smartmontools-database/attachments/20210130/3f416b30/attachment.htm>