[Smartmontools-database] (no subject)
Alexander Gavrilenko
anch665 at gmail.com
Wed Sep 16 14:54:28 CEST 2020
WDC WD3200LPVX-22V0TT0
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://listi.jpberlin.de/pipermail/smartmontools-database/attachments/20200916/6a9c156a/attachment-0001.htm>
-------------- next part --------------
smartctl 7.1 2019-12-30 r5022 [mips-linux-3.4.113] (localbuild)
Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: WDC WD3200LPVX-22V0TT0
Serial Number: WD-WXB1E643FJ8X
LU WWN Device Id: 5 0014ee 6af758998
Firmware Version: 01.01A01
User Capacity: 320,072,933,376 bytes [320 GB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5400 rpm
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: ACS-2 (minor revision not indicated)
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Wed Sep 16 15:44:29 2020 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM level is: 96 (intermediate level with standby)
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, NOT FROZEN [SEC1]
Wt Cache Reorder: Unknown
=== START OF READ SMART DATA SECTION ===
SMART Status not supported: Incomplete response, ATA output registers missing
SMART overall-health self-assessment test result: PASSED
Warning: This result is based on an Attribute check.
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 6120) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 72) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SCT capabilities: (0x7035) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-K 200 200 051 - 454
3 Spin_Up_Time POS--K 152 149 021 - 1375
4 Start_Stop_Count -O--CK 001 001 000 - 573080
5 Reallocated_Sector_Ct PO--CK 200 200 140 - 2
7 Seek_Error_Rate -OSR-K 200 200 000 - 0
9 Power_On_Hours -O--CK 067 067 000 - 24655
10 Spin_Retry_Count -O--CK 100 100 000 - 0
11 Calibration_Retry_Count -O--CK 100 100 000 - 0
12 Power_Cycle_Count -O--CK 100 100 000 - 291
191 G-Sense_Error_Rate -O--CK 001 001 000 - 161
192 Power-Off_Retract_Count -O--CK 200 200 000 - 242
193 Load_Cycle_Count -O--CK 001 001 000 - 1103448
194 Temperature_Celsius -O---K 110 089 000 - 33
196 Reallocated_Event_Count -O--CK 199 199 000 - 1
197 Current_Pending_Sector -O--CK 200 200 000 - 2
198 Offline_Uncorrectable ----CK 100 253 000 - 0
199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0
200 Multi_Zone_Error_Rate ---R-- 100 253 000 - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 5 Comprehensive SMART error log
0x03 GPL R/O 6 Ext. Comprehensive SMART error log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 1 Extended self-test log
0x09 SL R/W 1 Selective self-test log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xa0-0xa7 GPL,SL VS 16 Device vendor specific log
0xa8-0xb6 GPL,SL VS 1 Device vendor specific log
0xb7 GPL,SL VS 38 Device vendor specific log
0xbd GPL,SL VS 1 Device vendor specific log
0xc0 GPL,SL VS 1 Device vendor specific log
0xc1 GPL VS 93 Device vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (6 sectors)
Device Error Count: 453 (device log contains only the most recent 24 errors)
CR = Command Register
FEATR = Features Register
COUNT = Count (was: Sector Count) Register
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
LH = LBA High (was: Cylinder High) Register ] LBA
LM = LBA Mid (was: Cylinder Low) Register ] Register
LL = LBA Low (was: Sector Number) Register ]
DV = Device (was: Device/Head) Register
DC = Device Control Register
ER = Error register
ST = Status register
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 453 [20] occurred at disk power-on lifetime: 19408 hours (808 days + 16 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
04 -- 41 01 00 00 00 1e 4c 0a 18 e0 00 Error: ABRT 256 sectors at LBA = 0x1e4c0a18 = 508299800
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 01 00 00 00 1e 4c 09 81 e0 00 00:16:53.599 READ DMA EXT
25 00 00 01 00 00 00 1e 4c 08 81 e0 00 00:16:53.542 READ DMA EXT
25 00 00 01 00 00 00 1e 4c 07 81 e0 00 00:16:53.455 READ DMA EXT
25 00 00 01 00 00 00 1e 4c 06 81 e0 00 00:16:53.307 READ DMA EXT
25 00 00 01 00 00 00 1e 4c 05 81 e0 00 00:16:52.936 READ DMA EXT
Error 452 [19] occurred at disk power-on lifetime: 19408 hours (808 days + 16 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 04 00 00 12 84 ab 40 e0 00 Error: UNC 4 sectors at LBA = 0x1284ab40 = 310684480
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 00 04 00 00 12 84 ab 3d e0 00 00:01:07.541 READ DMA EXT
25 00 00 00 04 00 00 12 84 ab 3d e0 00 00:01:07.249 READ DMA EXT
25 00 00 00 04 00 00 12 84 ab 3d e0 00 00:01:06.970 READ DMA EXT
25 00 00 00 04 00 00 12 84 ab 3d e0 00 00:01:06.694 READ DMA EXT
25 00 00 00 04 00 00 12 84 ab 3d e0 00 00:01:06.405 READ DMA EXT
Error 451 [18] occurred at disk power-on lifetime: 19408 hours (808 days + 16 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 04 00 00 12 84 ab 40 e0 00 Error: UNC 4 sectors at LBA = 0x1284ab40 = 310684480
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 00 04 00 00 12 84 ab 3d e0 00 00:01:07.249 READ DMA EXT
25 00 00 00 04 00 00 12 84 ab 3d e0 00 00:01:06.970 READ DMA EXT
25 00 00 00 04 00 00 12 84 ab 3d e0 00 00:01:06.694 READ DMA EXT
25 00 00 00 04 00 00 12 84 ab 3d e0 00 00:01:06.405 READ DMA EXT
ef 00 03 00 46 00 00 00 00 00 00 e0 00 00:01:06.405 SET FEATURES [Set transfer mode]
Error 450 [17] occurred at disk power-on lifetime: 19408 hours (808 days + 16 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 04 00 00 12 84 ab 40 e0 00 Error: UNC 4 sectors at LBA = 0x1284ab40 = 310684480
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 00 04 00 00 12 84 ab 3d e0 00 00:01:06.970 READ DMA EXT
25 00 00 00 04 00 00 12 84 ab 3d e0 00 00:01:06.694 READ DMA EXT
25 00 00 00 04 00 00 12 84 ab 3d e0 00 00:01:06.405 READ DMA EXT
ef 00 03 00 46 00 00 00 00 00 00 e0 00 00:01:06.405 SET FEATURES [Set transfer mode]
e5 00 00 00 00 00 00 00 00 00 00 e0 00 00:01:06.405 CHECK POWER MODE
Error 449 [16] occurred at disk power-on lifetime: 19408 hours (808 days + 16 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 04 00 00 12 84 ab 40 e0 00 Error: UNC 4 sectors at LBA = 0x1284ab40 = 310684480
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 00 04 00 00 12 84 ab 3d e0 00 00:01:06.694 READ DMA EXT
25 00 00 00 04 00 00 12 84 ab 3d e0 00 00:01:06.405 READ DMA EXT
ef 00 03 00 46 00 00 00 00 00 00 e0 00 00:01:06.405 SET FEATURES [Set transfer mode]
e5 00 00 00 00 00 00 00 00 00 00 e0 00 00:01:06.405 CHECK POWER MODE
ec 00 00 00 00 00 00 00 00 00 00 e0 00 00:01:06.405 IDENTIFY DEVICE
Error 448 [15] occurred at disk power-on lifetime: 19408 hours (808 days + 16 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 04 00 00 12 84 ab 40 e0 00 Error: UNC 4 sectors at LBA = 0x1284ab40 = 310684480
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 00 04 00 00 12 84 ab 3d e0 00 00:01:06.405 READ DMA EXT
ef 00 03 00 46 00 00 00 00 00 00 e0 00 00:01:06.405 SET FEATURES [Set transfer mode]
e5 00 00 00 00 00 00 00 00 00 00 e0 00 00:01:06.405 CHECK POWER MODE
ec 00 00 00 00 00 00 00 00 00 00 e0 00 00:01:06.405 IDENTIFY DEVICE
ef 00 03 00 00 00 00 00 00 00 00 e0 00 00:01:06.404 SET FEATURES [Set transfer mode]
Error 447 [14] occurred at disk power-on lifetime: 19408 hours (808 days + 16 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 04 00 00 12 84 ab 40 e0 00 Error: UNC 4 sectors at LBA = 0x1284ab40 = 310684480
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 00 04 00 00 12 84 ab 3d e0 00 00:01:05.518 READ DMA EXT
25 00 00 00 01 00 00 12 84 ab 3c e0 00 00:01:05.518 READ DMA EXT
25 00 00 00 01 00 00 12 84 ab 3b e0 00 00:01:05.517 READ DMA EXT
25 00 00 00 06 00 00 12 84 ab 3b e0 00 00:01:05.215 READ DMA EXT
25 00 00 00 06 00 00 12 84 ab 3b e0 00 00:01:04.928 READ DMA EXT
Error 446 [13] occurred at disk power-on lifetime: 19408 hours (808 days + 16 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 06 00 00 12 84 ab 40 e0 00 Error: UNC 6 sectors at LBA = 0x1284ab40 = 310684480
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 00 06 00 00 12 84 ab 3b e0 00 00:01:05.215 READ DMA EXT
25 00 00 00 06 00 00 12 84 ab 3b e0 00 00:01:04.928 READ DMA EXT
25 00 00 00 06 00 00 12 84 ab 3b e0 00 00:01:04.640 READ DMA EXT
25 00 00 00 06 00 00 12 84 ab 3b e0 00 00:01:04.356 READ DMA EXT
25 00 00 00 06 00 00 12 84 ab 3b e0 00 00:01:04.060 READ DMA EXT
SMART Extended Self-test Log Version: 1 (1 sectors)
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 24655 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 3
SCT Version (vendor specific): 258 (0x0102)
Device State: Active (0)
Current Temperature: 33 Celsius
Power Cycle Min/Max Temperature: 30/33 Celsius
Lifetime Min/Max Temperature: 21/54 Celsius
Under/Over Temperature Limit Count: 0/0
Vendor specific:
01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 1 minute
Min/Max recommended Temperature: 0/60 Celsius
Min/Max Temperature Limit: -41/85 Celsius
Temperature History Size (Index): 128 (77)
Index Estimated Time Temperature Celsius
78 2020-09-16 13:37 31 ************
... ..( 3 skipped). .. ************
82 2020-09-16 13:41 31 ************
83 2020-09-16 13:42 ? -
84 2020-09-16 13:43 31 ************
85 2020-09-16 13:44 ? -
86 2020-09-16 13:45 31 ************
87 2020-09-16 13:46 31 ************
88 2020-09-16 13:47 ? -
89 2020-09-16 13:48 31 ************
... ..( 7 skipped). .. ************
97 2020-09-16 13:56 31 ************
98 2020-09-16 13:57 ? -
99 2020-09-16 13:58 31 ************
100 2020-09-16 13:59 31 ************
101 2020-09-16 14:00 31 ************
102 2020-09-16 14:01 ? -
103 2020-09-16 14:02 31 ************
104 2020-09-16 14:03 ? -
105 2020-09-16 14:04 31 ************
106 2020-09-16 14:05 31 ************
107 2020-09-16 14:06 ? -
108 2020-09-16 14:07 31 ************
109 2020-09-16 14:08 31 ************
110 2020-09-16 14:09 32 *************
111 2020-09-16 14:10 32 *************
112 2020-09-16 14:11 ? -
113 2020-09-16 14:12 32 *************
114 2020-09-16 14:13 32 *************
115 2020-09-16 14:14 32 *************
116 2020-09-16 14:15 ? -
117 2020-09-16 14:16 32 *************
... ..( 5 skipped). .. *************
123 2020-09-16 14:22 32 *************
124 2020-09-16 14:23 31 ************
... ..( 17 skipped). .. ************
14 2020-09-16 14:41 31 ************
15 2020-09-16 14:42 ? -
16 2020-09-16 14:43 31 ************
17 2020-09-16 14:44 31 ************
18 2020-09-16 14:45 ? -
19 2020-09-16 14:46 31 ************
20 2020-09-16 14:47 31 ************
21 2020-09-16 14:48 ? -
22 2020-09-16 14:49 31 ************
... ..( 22 skipped). .. ************
45 2020-09-16 15:12 31 ************
46 2020-09-16 15:13 ? -
47 2020-09-16 15:14 31 ************
48 2020-09-16 15:15 31 ************
49 2020-09-16 15:16 ? -
50 2020-09-16 15:17 31 ************
51 2020-09-16 15:18 ? -
52 2020-09-16 15:19 31 ************
53 2020-09-16 15:20 31 ************
54 2020-09-16 15:21 31 ************
55 2020-09-16 15:22 ? -
56 2020-09-16 15:23 31 ************
57 2020-09-16 15:24 ? -
58 2020-09-16 15:25 31 ************
59 2020-09-16 15:26 31 ************
60 2020-09-16 15:27 ? -
61 2020-09-16 15:28 31 ************
62 2020-09-16 15:29 31 ************
63 2020-09-16 15:30 ? -
64 2020-09-16 15:31 31 ************
... ..( 5 skipped). .. ************
70 2020-09-16 15:37 31 ************
71 2020-09-16 15:38 ? -
72 2020-09-16 15:39 31 ************
73 2020-09-16 15:40 31 ************
74 2020-09-16 15:41 32 *************
75 2020-09-16 15:42 33 **************
76 2020-09-16 15:43 ? -
77 2020-09-16 15:44 33 **************
SCT Error Recovery Control command not supported
Device Statistics (GP/SMART Log 0x04) not supported
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 2 0 Command failed due to ICRC error
0x0002 2 0 R_ERR response for data FIS
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0005 2 0 R_ERR response for non-data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
0x0008 2 0 Device-to-host non-data FIS retries
0x0009 2 24 Transition from drive PhyRdy to drive PhyNRdy
0x000a 2 14 Device-to-host register FISes sent due to a COMRESET
0x000b 2 0 CRC errors within host-to-device FIS
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
0x8000 4 81594 Vendor specific
More information about the Smartmontools-database
mailing list