[Smartmontools-database] KingSpec MT-256
Kunal Vaidya
kunalvaidya at gmail.com
Thu Nov 19 14:55:28 CET 2020
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://listi.jpberlin.de/pipermail/smartmontools-database/attachments/20201119/af46eb99/attachment-0001.htm>
-------------- next part --------------
smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.8.0-29-generic] (local build)
Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: MT-256
Serial Number: 979062195034
LU WWN Device Id: 5 000000 000000089
Firmware Version: T181222
User Capacity: 256,060,514,304 bytes [256 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
Form Factor: 2.5 inches
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: ACS-2 (minor revision not indicated)
SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Thu Nov 19 19:09:52 2020 IST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM feature is: Unavailable
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, frozen [SEC2]
Wt Cache Reorder: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 33) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 2) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x0031) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
9 Power_On_Hours -O--C- 100 100 000 - 3685
12 Power_Cycle_Count -O--C- 100 100 000 - 305
167 Unknown_Attribute -O---K 100 100 000 - 0
168 Unknown_Attribute -O--C- 100 100 000 - 0
169 Unknown_Attribute PO--C- 096 096 010 - 5898255
171 Unknown_Attribute -O--CK 000 000 000 - 0
172 Unknown_Attribute -O--CK 000 000 000 - 0
173 Unknown_Attribute -O--C- 200 200 000 - 8592359440
175 Program_Fail_Count_Chip -O---K 100 100 010 - 0
180 Unused_Rsvd_Blk_Cnt_Tot PO--CK 100 100 000 - 2454
187 Reported_Uncorrect -O--CK 100 000 000 - 0
192 Power-Off_Retract_Count -O--C- 100 100 000 - 23
194 Temperature_Celsius -O---K 030 030 000 - 30 (Min/Max 10/50)
206 Unknown_SSD_Attribute -O--CK 200 200 000 - 2
207 Unknown_SSD_Attribute -O--CK 200 200 000 - 37
208 Unknown_SSD_Attribute -O--CK 200 200 000 - 16
209 Unknown_SSD_Attribute -O--CK 200 200 000 - 65
210 Unknown_Attribute -O--CK 200 200 000 - 530
211 Unknown_Attribute -O--CK 200 200 000 - 381
231 Temperature_Celsius PO---K 099 099 005 - 1
233 Media_Wearout_Indicator -O--CK 100 100 000 - 16924080896
234 Unknown_Attribute -O--CK 100 100 000 - 83907887
241 Total_LBAs_Written -O--CK 100 100 000 - 5194972576
242 Total_LBAs_Read -O--CK 100 100 000 - 18353538924
245 Unknown_Attribute -O--CK 100 100 000 - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 51 Comprehensive SMART error log
0x03 GPL R/O 64 Ext. Comprehensive SMART error log
0x04 GPL,SL R/O 8 Device Statistics log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 1 Extended self-test log
0x09 SL R/W 1 Selective self-test log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (64 sectors)
No Errors Logged
SMART Extended Self-test Log Version: 1 (1 sectors)
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 3685 -
# 2 Short offline Completed without error 00% 3684 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 3
SCT Version (vendor specific): 1 (0x0001)
Device State: Active (0)
Current Temperature: 30 Celsius
Power Cycle Min/Max Temperature: ?/30 Celsius
Lifetime Min/Max Temperature: ?/ ? Celsius
Under/Over Temperature Limit Count: 0/0
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 1 minute
Min/Max recommended Temperature: -127/127 Celsius
Min/Max Temperature Limit: -127/127 Celsius
Temperature History Size (Index): 478 (314)
Index Estimated Time Temperature Celsius
315 2020-11-19 11:12 30 ***********
... ..(181 skipped). .. ***********
19 2020-11-19 14:14 30 ***********
20 2020-11-19 14:15 ? -
21 2020-11-19 14:16 ? -
22 2020-11-19 14:17 ? -
23 2020-11-19 14:18 30 ***********
... ..( 91 skipped). .. ***********
115 2020-11-19 15:50 30 ***********
116 2020-11-19 15:51 ? -
117 2020-11-19 15:52 30 ***********
118 2020-11-19 15:53 ? -
119 2020-11-19 15:54 30 ***********
120 2020-11-19 15:55 30 ***********
121 2020-11-19 15:56 30 ***********
122 2020-11-19 15:57 ? -
123 2020-11-19 15:58 30 ***********
... ..( 22 skipped). .. ***********
146 2020-11-19 16:21 30 ***********
147 2020-11-19 16:22 ? -
148 2020-11-19 16:23 30 ***********
... ..( 13 skipped). .. ***********
162 2020-11-19 16:37 30 ***********
163 2020-11-19 16:38 ? -
164 2020-11-19 16:39 30 ***********
... ..(149 skipped). .. ***********
314 2020-11-19 19:09 30 ***********
SCT Error Recovery Control command not supported
Device Statistics (GP Log 0x04)
Page Offset Size Value Flags Description
0x01 ===== = = === == General Statistics (rev 1) ==
0x01 0x008 4 305 --- Lifetime Power-On Resets
0x01 0x010 4 3685 --- Power-on Hours
0x01 0x018 6 5194972576 --- Logical Sectors Written
0x01 0x020 6 276954661 --- Number of Write Commands
0x01 0x028 6 18353538924 --- Logical Sectors Read
0x01 0x030 6 227351860 --- Number of Read Commands
0x01 0x038 6 3393407143452 --- Date and Time TimeStamp
0x07 ===== = = === == Solid State Device Statistics (rev 1) ==
0x07 0x008 1 4 N-- Percentage Used Endurance Indicator
|||_ C monitored condition met
||__ D supports DSN
|___ N normalized value
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 2 0 Command failed due to ICRC error
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
0x0008 2 0 Device-to-host non-data FIS retries
0x0009 4 0 Transition from drive PhyRdy to drive PhyNRdy
0x000a 4 3 Device-to-host register FISes sent due to a COMRESET
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC
0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC
More information about the Smartmontools-database
mailing list