[Smartmontools-database] Seagate ST2000DM008
Evili del Rio i Silvan
evili.del.rio at gmail.com
Tue Feb 4 09:10:54 CET 2020
Product Data Sheet:
https://www.seagate.com/www-content/datasheets/pdfs/3-5-barracudaDS1900-12-1908US-en_US.pdf
User Manual:
https://www.seagate.com/www-content/product-content/barracuda-fam/barracuda-new/en-us/docs/100817550h.pdf
-------------- next part --------------
smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.4.15-200.fc31.x86_64] (local build)
Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: ST2000DM008-2FR102
Serial Number: ZFL1B981
LU WWN Device Id: 5 000c50 0c3a1078c
Firmware Version: 0001
User Capacity: 2.000.398.934.016 bytes [2,00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 7200 rpm
Form Factor: 3.5 inches
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: ACS-3 T13/2161-D revision 5
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Tue Feb 4 08:49:25 2020 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM level is: 20 (intermediate level with standby)
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, frozen [SEC2]
Wt Cache Reorder: Unavailable
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
See vendor-specific Attribute list for marginal Attributes.
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 0) seconds.
Offline data collection
capabilities: (0x73) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 203) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x30a5) SCT Status supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-- 078 069 006 - 61935072
3 Spin_Up_Time PO---- 099 098 000 - 0
4 Start_Stop_Count -O--CK 100 100 020 - 32
5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0
7 Seek_Error_Rate POSR-- 060 060 045 - 1016305
9 Power_On_Hours -O--CK 100 100 000 - 35 (239 142 0)
10 Spin_Retry_Count PO--C- 100 100 097 - 0
12 Power_Cycle_Count -O--CK 100 100 020 - 25
183 Runtime_Bad_Block -O--CK 100 100 000 - 0
184 End-to-End_Error -O--CK 099 099 099 NOW 1
187 Reported_Uncorrect -O--CK 100 100 000 - 0
188 Command_Timeout -O--CK 100 100 000 - 0
189 High_Fly_Writes -O-RCK 100 100 000 - 0
190 Airflow_Temperature_Cel -O---K 070 054 040 - 30 (Min/Max 29/31)
191 G-Sense_Error_Rate -O--CK 100 100 000 - 0
192 Power-Off_Retract_Count -O--CK 100 100 000 - 15
193 Load_Cycle_Count -O--CK 100 100 000 - 147
194 Temperature_Celsius -O---K 030 046 000 - 30 (0 20 0 0 0)
195 Hardware_ECC_Recovered -O-RC- 078 069 000 - 61935072
197 Current_Pending_Sector -O--C- 100 100 000 - 0
198 Offline_Uncorrectable ----C- 100 100 000 - 0
199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0
240 Head_Flying_Hours ------ 100 253 000 - 19 (42 102 0)
241 Total_LBAs_Written ------ 100 253 000 - 771013505
242 Total_LBAs_Read ------ 100 253 000 - 125869642
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 5 Comprehensive SMART error log
0x03 GPL R/O 5 Ext. Comprehensive SMART error log
0x04 GPL,SL R/O 8 Device Statistics log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 1 Extended self-test log
0x09 SL R/W 1 Selective self-test log
0x0c GPL R/O 2048 Pending Defects log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x21 GPL R/O 1 Write stream error log
0x22 GPL R/O 1 Read stream error log
0x24 GPL R/O 512 Current Device Internal Status Data log
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xa1 GPL,SL VS 24 Device vendor specific log
0xa2 GPL VS 8160 Device vendor specific log
0xa6 GPL VS 192 Device vendor specific log
0xa8-0xa9 GPL,SL VS 136 Device vendor specific log
0xab GPL VS 1 Device vendor specific log
0xb0 GPL VS 9048 Device vendor specific log
0xbd GPL VS 8 Device vendor specific log
0xbe-0xbf GPL VS 65535 Device vendor specific log
0xc0 GPL,SL VS 1 Device vendor specific log
0xc1 GPL,SL VS 16 Device vendor specific log
0xc3 GPL,SL VS 8 Device vendor specific log
0xc4 GPL,SL VS 24 Device vendor specific log
0xd1 GPL VS 264 Device vendor specific log
0xd3 GPL VS 1920 Device vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (5 sectors)
Device Error Count: 1
CR = Command Register
FEATR = Features Register
COUNT = Count (was: Sector Count) Register
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
LH = LBA High (was: Cylinder High) Register ] LBA
LM = LBA Mid (was: Cylinder Low) Register ] Register
LL = LBA Low (was: Sector Number) Register ]
DV = Device (was: Device/Head) Register
DC = Device Control Register
ER = Error register
ST = Status register
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 1 [0] occurred at disk power-on lifetime: 1 hours (0 days + 1 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
04 -- 73 00 04 00 00 00 80 87 80 40 00 Device Fault; Error: ABRT at LBA = 0x00808780 = 8423296
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
61 00 00 00 90 00 00 04 93 99 60 40 00 00:29:35.450 WRITE FPDMA QUEUED
61 00 00 00 18 00 00 04 93 99 40 40 00 00:29:35.437 WRITE FPDMA QUEUED
61 00 00 00 60 00 00 04 93 98 d8 40 00 00:29:35.437 WRITE FPDMA QUEUED
61 00 00 00 68 00 00 04 93 98 60 40 00 00:29:35.437 WRITE FPDMA QUEUED
61 00 00 00 40 00 00 04 93 98 18 40 00 00:29:35.437 WRITE FPDMA QUEUED
SMART Extended Self-test Log Version: 1 (1 sectors)
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 35 -
# 2 Extended offline Interrupted (host reset) 00% 34 -
# 3 Extended captive Interrupted (host reset) 00% 31 -
# 4 Short offline Completed without error 00% 31 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 3
SCT Version (vendor specific): 522 (0x020a)
Device State: Active (0)
Current Temperature: 31 Celsius
Power Cycle Min/Max Temperature: 29/31 Celsius
Lifetime Min/Max Temperature: 20/45 Celsius
Under/Over Temperature Limit Count: 0/0
SCT Temperature History Version: 2
Temperature Sampling Period: 3 minutes
Temperature Logging Interval: 59 minutes
Min/Max recommended Temperature: 14/55 Celsius
Min/Max Temperature Limit: 10/60 Celsius
Temperature History Size (Index): 128 (65)
Index Estimated Time Temperature Celsius
66 2020-01-30 03:33 ? -
... ..( 60 skipped). .. -
127 2020-02-01 15:32 ? -
0 2020-02-01 16:31 29 **********
1 2020-02-01 17:30 ? -
2 2020-02-01 18:29 23 ****
3 2020-02-01 19:28 ? -
4 2020-02-01 20:27 29 **********
5 2020-02-01 21:26 ? -
6 2020-02-01 22:25 21 **
7 2020-02-01 23:24 ? -
8 2020-02-02 00:23 27 ********
9 2020-02-02 01:22 ? -
10 2020-02-02 02:21 28 *********
11 2020-02-02 03:20 31 ************
... ..( 7 skipped). .. ************
19 2020-02-02 11:12 31 ************
20 2020-02-02 12:11 30 ***********
21 2020-02-02 13:10 ? -
22 2020-02-02 14:09 20 *
23 2020-02-02 15:08 42 ***********************
24 2020-02-02 16:07 43 ************************
25 2020-02-02 17:06 42 ***********************
26 2020-02-02 18:05 42 ***********************
27 2020-02-02 19:04 ? -
28 2020-02-02 20:03 21 **
29 2020-02-02 21:02 ? -
30 2020-02-02 22:01 21 **
31 2020-02-02 23:00 ? -
32 2020-02-02 23:59 27 ********
33 2020-02-03 00:58 ? -
34 2020-02-03 01:57 28 *********
35 2020-02-03 02:56 ? -
36 2020-02-03 03:55 22 ***
37 2020-02-03 04:54 ? -
38 2020-02-03 05:53 23 ****
39 2020-02-03 06:52 ? -
40 2020-02-03 07:51 28 *********
41 2020-02-03 08:50 ? -
42 2020-02-03 09:49 23 ****
43 2020-02-03 10:48 ? -
44 2020-02-03 11:47 24 *****
45 2020-02-03 12:46 ? -
46 2020-02-03 13:45 26 *******
47 2020-02-03 14:44 ? -
48 2020-02-03 15:43 26 *******
49 2020-02-03 16:42 ? -
50 2020-02-03 17:41 27 ********
51 2020-02-03 18:40 ? -
52 2020-02-03 19:39 27 ********
53 2020-02-03 20:38 ? -
54 2020-02-03 21:37 34 ***************
55 2020-02-03 22:36 ? -
56 2020-02-03 23:35 30 ***********
57 2020-02-04 00:34 ? -
58 2020-02-04 01:33 40 *********************
59 2020-02-04 02:32 45 **************************
60 2020-02-04 03:31 ? -
61 2020-02-04 04:30 38 *******************
62 2020-02-04 05:29 ? -
63 2020-02-04 06:28 25 ******
64 2020-02-04 07:27 ? -
65 2020-02-04 08:26 29 **********
SCT Error Recovery Control command not supported
Device Statistics (GP Log 0x04)
Page Offset Size Value Flags Description
0x01 ===== = = === == General Statistics (rev 1) ==
0x01 0x008 4 25 --- Lifetime Power-On Resets
0x01 0x010 4 35 --- Power-on Hours
0x01 0x018 6 761284792 --- Logical Sectors Written
0x01 0x020 6 4894330 --- Number of Write Commands
0x01 0x028 6 131612520 --- Logical Sectors Read
0x01 0x030 6 1740459 --- Number of Read Commands
0x01 0x038 6 - --- Date and Time TimeStamp
0x03 ===== = = === == Rotating Media Statistics (rev 1) ==
0x03 0x008 4 22 --- Spindle Motor Power-on Hours
0x03 0x010 4 19 --- Head Flying Hours
0x03 0x018 4 149 --- Head Load Events
0x03 0x020 4 0 --- Number of Reallocated Logical Sectors
0x03 0x028 4 0 --- Read Recovery Attempts
0x03 0x030 4 0 --- Number of Mechanical Start Failures
0x03 0x038 4 0 --- Number of Realloc. Candidate Logical Sectors
0x03 0x040 4 15 --- Number of High Priority Unload Events
0x04 ===== = = === == General Errors Statistics (rev 1) ==
0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors
0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion
0x05 ===== = = === == Temperature Statistics (rev 1) ==
0x05 0x008 1 31 --- Current Temperature
0x05 0x010 1 - --- Average Short Term Temperature
0x05 0x018 1 - --- Average Long Term Temperature
0x05 0x020 1 45 --- Highest Temperature
0x05 0x028 1 0 --- Lowest Temperature
0x05 0x030 1 - --- Highest Average Short Term Temperature
0x05 0x038 1 - --- Lowest Average Short Term Temperature
0x05 0x040 1 - --- Highest Average Long Term Temperature
0x05 0x048 1 - --- Lowest Average Long Term Temperature
0x05 0x050 4 0 --- Time in Over-Temperature
0x05 0x058 1 60 --- Specified Maximum Operating Temperature
0x05 0x060 4 0 --- Time in Under-Temperature
0x05 0x068 1 0 --- Specified Minimum Operating Temperature
0x06 ===== = = === == Transport Statistics (rev 1) ==
0x06 0x008 4 36 --- Number of Hardware Resets
0x06 0x010 4 10 --- Number of ASR Events
0x06 0x018 4 1 --- Number of Interface CRC Errors
|||_ C monitored condition met
||__ D supports DSN
|___ N normalized value
Pending Defects log (GP Log 0x0c)
No Defects Logged
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x000a 2 6 Device-to-host register FISes sent due to a COMRESET
0x0001 2 0 Command failed due to ICRC error
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
More information about the Smartmontools-database
mailing list