[Smartmontools-database] WDC-WD3140LMCW-11D9GS3
Igor Velkov
shtripok at gmail.com
Tue Dec 15 02:32:10 CET 2020
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://listi.jpberlin.de/pipermail/smartmontools-database/attachments/20201215/da433932/attachment.htm>
-------------- next part --------------
smartctl 7.1 2019-12-30 r5022 [aarch64-linux-5.9.14-meson64] (local build)
Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: WDC WD3140LMCW-11D9GS3
Serial Number: WD-WX81A26AFSNC
LU WWN Device Id: 5 0014ee 65be68da4
Firmware Version: 01.01A01
User Capacity: 314,071,769,088 bytes [314 GB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5400 rpm
Form Factor: 2.5 inches
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: ACS-3 T13/2161-D revision 5
SATA Version is: SATA 3.1, 1.5 Gb/s (current: 1.5 Gb/s)
Local Time is: Tue Dec 15 03:26:42 2020 EET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM level is: 128 (minimum power consumption without standby)
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, NOT FROZEN [SEC1]
Wt Cache Reorder: Unknown
=== START OF READ SMART DATA SECTION ===
SMART Status not supported: Incomplete response, ATA output registers missing
SMART overall-health self-assessment test result: PASSED
Warning: This result is based on an Attribute check.
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 6600) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 78) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SCT capabilities: (0x3035) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0
3 Spin_Up_Time POS--K 108 107 021 - 3583
4 Start_Stop_Count -O--CK 100 100 000 - 41
5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0
7 Seek_Error_Rate -OSR-K 100 253 000 - 0
9 Power_On_Hours -O--CK 100 100 000 - 74
10 Spin_Retry_Count -O--CK 100 253 000 - 0
11 Calibration_Retry_Count -O--CK 100 253 000 - 0
12 Power_Cycle_Count -O--CK 100 100 000 - 18
192 Power-Off_Retract_Count -O--CK 200 200 000 - 2
193 Load_Cycle_Count -O--CK 200 200 000 - 256
194 Temperature_Celsius -O---K 112 089 000 - 31
196 Reallocated_Event_Count -O--CK 200 200 000 - 0
197 Current_Pending_Sector -O--CK 200 200 000 - 0
198 Offline_Uncorrectable ----CK 100 253 000 - 0
199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0
200 Multi_Zone_Error_Rate ---R-- 100 253 000 - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 5 Comprehensive SMART error log
0x03 GPL R/O 6 Ext. Comprehensive SMART error log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 1 Extended self-test log
0x09 SL R/W 1 Selective self-test log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xa0-0xa7 GPL,SL VS 16 Device vendor specific log
0xa8-0xb6 GPL,SL VS 1 Device vendor specific log
0xb7 GPL,SL VS 48 Device vendor specific log
0xbd GPL,SL VS 1 Device vendor specific log
0xc0 GPL,SL VS 1 Device vendor specific log
0xc1 GPL VS 93 Device vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (6 sectors)
No Errors Logged
SMART Extended Self-test Log Version: 1 (1 sectors)
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 74 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 3
SCT Version (vendor specific): 258 (0x0102)
Device State: Active (0)
Current Temperature: 30 Celsius
Power Cycle Min/Max Temperature: 26/31 Celsius
Lifetime Min/Max Temperature: 23/54 Celsius
Under/Over Temperature Limit Count: 0/0
Vendor specific:
01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 1 minute
Min/Max recommended Temperature: 0/60 Celsius
Min/Max Temperature Limit: -41/85 Celsius
Temperature History Size (Index): 128 (47)
Index Estimated Time Temperature Celsius
48 2020-12-15 01:19 35 ****************
49 2020-12-15 01:20 36 *****************
... ..( 2 skipped). .. *****************
52 2020-12-15 01:23 36 *****************
53 2020-12-15 01:24 37 ******************
54 2020-12-15 01:25 37 ******************
55 2020-12-15 01:26 38 *******************
56 2020-12-15 01:27 38 *******************
57 2020-12-15 01:28 39 ********************
58 2020-12-15 01:29 39 ********************
59 2020-12-15 01:30 39 ********************
60 2020-12-15 01:31 40 *********************
61 2020-12-15 01:32 40 *********************
62 2020-12-15 01:33 40 *********************
63 2020-12-15 01:34 ? -
64 2020-12-15 01:35 24 *****
65 2020-12-15 01:36 24 *****
66 2020-12-15 01:37 24 *****
67 2020-12-15 01:38 25 ******
68 2020-12-15 01:39 26 *******
69 2020-12-15 01:40 27 ********
70 2020-12-15 01:41 27 ********
71 2020-12-15 01:42 28 *********
72 2020-12-15 01:43 28 *********
73 2020-12-15 01:44 29 **********
74 2020-12-15 01:45 30 ***********
75 2020-12-15 01:46 30 ***********
76 2020-12-15 01:47 31 ************
77 2020-12-15 01:48 31 ************
78 2020-12-15 01:49 32 *************
79 2020-12-15 01:50 32 *************
80 2020-12-15 01:51 33 **************
81 2020-12-15 01:52 33 **************
82 2020-12-15 01:53 34 ***************
83 2020-12-15 01:54 34 ***************
84 2020-12-15 01:55 35 ****************
85 2020-12-15 01:56 35 ****************
86 2020-12-15 01:57 36 *****************
... ..( 3 skipped). .. *****************
90 2020-12-15 02:01 36 *****************
91 2020-12-15 02:02 37 ******************
... ..( 2 skipped). .. ******************
94 2020-12-15 02:05 37 ******************
95 2020-12-15 02:06 38 *******************
96 2020-12-15 02:07 ? -
97 2020-12-15 02:08 26 *******
98 2020-12-15 02:09 26 *******
99 2020-12-15 02:10 26 *******
100 2020-12-15 02:11 27 ********
... ..( 6 skipped). .. ********
107 2020-12-15 02:18 27 ********
108 2020-12-15 02:19 28 *********
... ..( 24 skipped). .. *********
5 2020-12-15 02:44 28 *********
6 2020-12-15 02:45 27 ********
... ..( 13 skipped). .. ********
20 2020-12-15 02:59 27 ********
21 2020-12-15 03:00 26 *******
... ..( 3 skipped). .. *******
25 2020-12-15 03:04 26 *******
26 2020-12-15 03:05 ? -
27 2020-12-15 03:06 26 *******
28 2020-12-15 03:07 27 ********
... ..( 4 skipped). .. ********
33 2020-12-15 03:12 27 ********
34 2020-12-15 03:13 29 **********
35 2020-12-15 03:14 29 **********
36 2020-12-15 03:15 30 ***********
37 2020-12-15 03:16 31 ************
... ..( 3 skipped). .. ************
41 2020-12-15 03:20 31 ************
42 2020-12-15 03:21 30 ***********
43 2020-12-15 03:22 30 ***********
44 2020-12-15 03:23 30 ***********
45 2020-12-15 03:24 29 **********
46 2020-12-15 03:25 29 **********
47 2020-12-15 03:26 30 ***********
SCT Error Recovery Control command not supported
Device Statistics (GP/SMART Log 0x04) not supported
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 2 0 Command failed due to ICRC error
0x0002 2 0 R_ERR response for data FIS
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0005 2 0 R_ERR response for non-data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
0x0008 2 0 Device-to-host non-data FIS retries
0x0009 2 4 Transition from drive PhyRdy to drive PhyNRdy
0x000a 2 4 Device-to-host register FISes sent due to a COMRESET
0x000b 2 0 CRC errors within host-to-device FIS
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
0x8000 4 4652 Vendor specific
More information about the Smartmontools-database
mailing list