[Smartmontools-database] smartctl PLEXTOR PX-128M6V
Michał Sochoń
kaszpir at gmail.com
Fri Apr 24 13:07:44 CEST 2020
Attached file is the output of the command:
smartctl -q noserial -x /dev/sda > smartctl-PLEXTOR-PX-128M6V.txt
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://listi.jpberlin.de/pipermail/smartmontools-database/attachments/20200424/255fd107/attachment.html>
-------------- next part --------------
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-5.3.0-46-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: PLEXTOR PX-128M6V
Firmware Version: 1.04
User Capacity: 128,035,676,160 bytes [128 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: ACS-2 (minor revision not indicated)
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Fri Apr 24 10:27:31 2020 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM feature is: Unavailable
Rd look-ahead is: Enabled
Write cache is: Enabled
ATA Security is: Disabled, NOT FROZEN [SEC1]
Write SCT (Get) Feature Control Command failed: scsi error badly formed scsi parameters
Wt Cache Reorder: Unknown (SCT Feature Control command failed)
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x02) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 0) seconds.
Offline data collection
capabilities: (0x11) SMART execute Offline immediate.
No Auto Offline data collection support.
Suspend Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
No Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 10) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 1
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-K 100 100 000 - 0
5 Reallocated_Sector_Ct PO---- 100 100 000 - 0
9 Power_On_Hours -O---- 100 100 000 - 1981
12 Power_Cycle_Count PO---- 100 100 000 - 1558
170 Unknown_Attribute -O--CK 100 100 000 - 0
171 Unknown_Attribute PO---- 100 100 000 - 4
172 Unknown_Attribute PO---- 100 100 000 - 0
173 Unknown_Attribute PO---- 100 100 000 - 215
174 Unknown_Attribute PO---- 100 100 000 - 305
175 Program_Fail_Count_Chip PO---- 100 100 000 - 4
176 Erase_Fail_Count_Chip PO---- 100 100 000 - 0
177 Wear_Leveling_Count PO---- 100 100 000 - 215
178 Used_Rsvd_Blk_Cnt_Chip PO---- 100 100 000 - 0
179 Used_Rsvd_Blk_Cnt_Tot PO---- 100 100 000 - 0
180 Unused_Rsvd_Blk_Cnt_Tot PO--CK 100 100 000 - 130
181 Program_Fail_Cnt_Total PO---- 100 100 000 - 4
182 Erase_Fail_Count_Total PO---- 100 100 000 - 0
183 Runtime_Bad_Block -O--CK 100 100 000 - 440
192 Power-Off_Retract_Count PO---- 100 100 000 - 305
195 Hardware_ECC_Recovered PO---- 100 100 000 - 0
199 UDMA_CRC_Error_Count PO---- 100 100 000 - 0
232 Available_Reservd_Space PO---- 100 100 010 - 100
233 Media_Wearout_Indicator PO---- 100 100 000 - 24442
241 Total_LBAs_Written PO---- 100 100 000 - 308116
242 Total_LBAs_Read PO---- 100 100 000 - 348984
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 GPL,SL R/O 1 Summary SMART error log
0x02 GPL,SL R/O 1 Comprehensive SMART error log
0x03 GPL,SL R/O 1 Ext. Comprehensive SMART error log
0x04 GPL,SL R/O 8 Device Statistics log
0x06 GPL,SL R/O 1 SMART self-test log
0x07 GPL,SL R/O 1 Extended self-test log
0x09 GPL,SL R/W 1 Selective self-test log
0x10 GPL,SL R/O 1 SATA NCQ Queued Error log
0x11 GPL,SL R/O 1 SATA Phy Event Counters log
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (1 sectors)
No Errors Logged
SMART Extended Self-test Log Version: 1 (1 sectors)
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed without error 00% 1981 -
# 2 Short offline Completed without error 00% 1981 -
# 3 Extended offline Completed without error 00% 1789 -
# 4 Short offline Completed without error 00% 1789 -
# 5 Extended offline Completed without error 00% 1627 -
# 6 Short offline Completed without error 00% 1627 -
# 7 Extended offline Completed without error 00% 1626 -
# 8 Short offline Completed without error 00% 1626 -
Selective Self-tests/Logging not supported
SCT Status Version: 3
SCT Version (vendor specific): 0 (0x0000)
SCT Support Level: 0
Device State: Active (0)
Current Temperature: 0 Celsius
Power Cycle Max Temperature: 0 Celsius
Lifetime Max Temperature: 0 Celsius
SCT Temperature History Version: 2
Temperature Sampling Period: 0 minutes
Temperature Logging Interval: 0 minutes
Min/Max recommended Temperature: 0/100 Celsius
Min/Max Temperature Limit: 0/100 Celsius
Temperature History Size (Index): 128 (127)
Index Estimated Time Temperature Celsius
0 2020-04-24 08:20 ? -
... ..(126 skipped). .. -
127 2020-04-24 10:27 ? -
SCT Error Recovery Control:
Read: Disabled
Write: Disabled
Device Statistics (GP Log 0x04)
Page Offset Size Value Flags Description
0x01 ===== = = === == General Statistics (rev 2) ==
0x01 0x008 4 1558 --- Lifetime Power-On Resets
0x01 0x010 4 1981 --- Power-on Hours
0x01 0x018 6 3012838838 --- Logical Sectors Written
0x01 0x020 6 240405638 --- Number of Write Commands
0x01 0x028 6 1396192985 --- Logical Sectors Read
0x01 0x030 6 289806443 --- Number of Read Commands
0x02 ===== = = === == Free-Fall Statistics (empty) ==
0x03 ===== = = === == Rotating Media Statistics (empty) ==
0x04 ===== = = === == General Errors Statistics (rev 1) ==
0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors
0x04 0x010 4 318 --- Resets Between Cmd Acceptance and Completion
0x05 ===== = = === == Temperature Statistics (rev 1) ==
0x05 0x008 1 55 --- Current Temperature
0x06 ===== = = === == Transport Statistics (rev 1) ==
0x06 0x008 4 5100 --- Number of Hardware Resets
0x06 0x018 4 6 --- Number of Interface CRC Errors
0x07 ===== = = === == Solid State Device Statistics (rev 1) ==
0x07 0x008 1 7 --- Percentage Used Endurance Indicator
|||_ C monitored condition met
||__ D supports DSN
|___ N normalized value
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 2 0 Command failed due to ICRC error
0x0002 2 0 R_ERR response for data FIS
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0005 2 0 R_ERR response for non-data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
0x0008 2 0 Device-to-host non-data FIS retries
0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy
0x000a 2 5 Device-to-host register FISes sent due to a COMRESET
0x000b 2 0 CRC errors within host-to-device FIS
0x000d 2 0 Non-CRC errors within host-to-device FIS
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC
0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC
More information about the Smartmontools-database
mailing list