[Smartmontools-database] Toshiba Stor.E D10
Karol Rosłaniec
kros at linko.pl
Fri Sep 27 03:06:20 CEST 2019
Please add to drivedb.h (entry tested by me):
// Lumberg, Inc.
{ "USB: ; Toshiba Stor.E D10",
"0x0939:0x0b13",
"",
"",
"-d sat,12"
},
# lsusb
Bus 002 Device 005: ID 0939:0b13 Lumberg, Inc.
This is USB external drive based on Initio INIC-1610PL chipset:
http://www.initio.com/Html/inic-1610.html
-------------- next part --------------
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.9.0-11-amd64] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: SAMSUNG SpinPoint F4 EG (AF)
Device Model: SAMSUNG HD155UI
Serial Number: S2KRJD2B301160
LU WWN Device Id: 5 0024e9 004bf9fcc
Firmware Version: 1AQ10001
User Capacity: 1.500.301.910.016 bytes [1,50 TB]
Sector Size: 512 bytes logical/physical
Rotation Rate: 5400 rpm
Form Factor: 3.5 inches
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS T13/1699-D revision 6
SATA Version is: SATA 2.6, 3.0 Gb/s
Local Time is: Fri Sep 27 02:39:17 2019 CEST
==> WARNING: Using smartmontools or hdparm with this
drive may result in data loss due to a firmware bug.
****** THIS DRIVE MAY OR MAY NOT BE AFFECTED! ******
Buggy and fixed firmware report same version number!
See the following web pages for details:
http://knowledge.seagate.com/articles/en_US/FAQ/223571en
http://www.smartmontools.org/wiki/SamsungF4EGBadBlocks
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Disabled
APM feature is: Disabled
Rd look-ahead is: Enabled
Write cache is: Enabled
ATA Security is: Disabled, NOT FROZEN [SEC1]
Wt Cache Reorder: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (14700) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 245) minutes.
SCT capabilities: (0x003f) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-K 100 100 051 - 135
2 Throughput_Performance -OS--K 252 252 000 - 0
3 Spin_Up_Time PO---K 067 067 025 - 10076
4 Start_Stop_Count -O--CK 100 100 000 - 72
5 Reallocated_Sector_Ct PO--CK 252 252 010 - 0
7 Seek_Error_Rate -OSR-K 252 252 051 - 0
8 Seek_Time_Performance --S--K 252 252 015 - 0
9 Power_On_Hours -O--CK 100 100 000 - 119
10 Spin_Retry_Count -O--CK 252 252 051 - 0
11 Calibration_Retry_Count -O--CK 252 252 000 - 0
12 Power_Cycle_Count -O--CK 100 100 000 - 63
181 Program_Fail_Cnt_Total -O---K 098 098 000 - 62252355
191 G-Sense_Error_Rate -O---K 100 100 000 - 9
192 Power-Off_Retract_Count -O---K 252 252 000 - 0
194 Temperature_Celsius -O---- 064 055 000 - 32 (Min/Max 17/45)
195 Hardware_ECC_Recovered -O-RCK 100 100 000 - 0
196 Reallocated_Event_Count -O--CK 252 252 000 - 0
197 Current_Pending_Sector -O--CK 252 100 000 - 0
198 Offline_Uncorrectable ----CK 252 252 000 - 0
199 UDMA_CRC_Error_Count -OS-CK 200 200 000 - 0
200 Multi_Zone_Error_Rate -O-R-K 100 100 000 - 0
223 Load_Retry_Count -O--CK 252 252 000 - 0
225 Load_Cycle_Count -O--CK 100 100 000 - 81
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
ATA_READ_LOG_EXT (addr=0x00:0x00, page=0, n=1) failed: 48-bit ATA commands require SAT ATA PASS-THROUGH (16)
Read GP Log Directory failed
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 2 Comprehensive SMART error log
0x06 SL R/O 1 SMART self-test log
0x09 SL R/W 1 Selective self-test log
0x80-0x9f SL R/W 16 Host vendor specific log
0xe0 SL R/W 1 SCT Command/Status
0xe1 SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log (GP Log 0x03) not supported
SMART Error Log Version: 1
No Errors Logged
SMART Extended Self-test Log (GP Log 0x07) not supported
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 109 -
# 2 Short offline Completed without error 00% 103 -
# 3 Short offline Completed without error 00% 92 -
# 4 Offline Interrupted (host reset) 80% 92 -
# 5 Short captive Self-test routine in progress 80% 92 -
# 6 Offline Interrupted (host reset) 90% 90 -
# 7 Extended captive Self-test routine in progress 90% 90 -
# 8 Short captive Completed: read failure 90% 90 780736024
# 9 Selective offline Completed: read failure 90% 90 780736024
#10 Short offline Completed: read failure 90% 90 780736024
#11 Short offline Completed: read failure 90% 83 780736024
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 780736024 780736064 Completed [00% left] (0-65535)
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 2
SCT Version (vendor specific): 256 (0x0100)
SCT Support Level: 1
Device State: Active (0)
Current Temperature: 32 Celsius
Power Cycle Min/Max Temperature: 29/33 Celsius
Lifetime Min/Max Temperature: 17/62 Celsius
Under/Over Temperature Limit Count: 0/0
SCT Temperature History Version: 2
Temperature Sampling Period: 5 minutes
Temperature Logging Interval: 5 minutes
Min/Max recommended Temperature: -5/80 Celsius
Min/Max Temperature Limit: -10/85 Celsius
Temperature History Size (Index): 128 (20)
Index Estimated Time Temperature Celsius
21 2019-09-26 16:00 32 *************
22 2019-09-26 16:05 40 *********************
23 2019-09-26 16:10 40 *********************
24 2019-09-26 16:15 40 *********************
25 2019-09-26 16:20 39 ********************
... ..( 2 skipped). .. ********************
28 2019-09-26 16:35 39 ********************
29 2019-09-26 16:40 40 *********************
30 2019-09-26 16:45 41 **********************
31 2019-09-26 16:50 40 *********************
32 2019-09-26 16:55 40 *********************
33 2019-09-26 17:00 40 *********************
34 2019-09-26 17:05 39 ********************
... ..( 2 skipped). .. ********************
37 2019-09-26 17:20 39 ********************
38 2019-09-26 17:25 38 *******************
39 2019-09-26 17:30 38 *******************
40 2019-09-26 17:35 38 *******************
41 2019-09-26 17:40 39 ********************
42 2019-09-26 17:45 40 *********************
43 2019-09-26 17:50 40 *********************
44 2019-09-26 17:55 41 **********************
45 2019-09-26 18:00 41 **********************
46 2019-09-26 18:05 41 **********************
47 2019-09-26 18:10 42 ***********************
48 2019-09-26 18:15 43 ************************
49 2019-09-26 18:20 42 ***********************
... ..( 2 skipped). .. ***********************
52 2019-09-26 18:35 42 ***********************
53 2019-09-26 18:40 41 **********************
54 2019-09-26 18:45 41 **********************
55 2019-09-26 18:50 40 *********************
56 2019-09-26 18:55 40 *********************
57 2019-09-26 19:00 40 *********************
58 2019-09-26 19:05 39 ********************
... ..( 2 skipped). .. ********************
61 2019-09-26 19:20 39 ********************
62 2019-09-26 19:25 40 *********************
63 2019-09-26 19:30 39 ********************
... ..( 2 skipped). .. ********************
66 2019-09-26 19:45 39 ********************
67 2019-09-26 19:50 40 *********************
68 2019-09-26 19:55 39 ********************
69 2019-09-26 20:00 39 ********************
70 2019-09-26 20:05 39 ********************
71 2019-09-26 20:10 40 *********************
72 2019-09-26 20:15 40 *********************
73 2019-09-26 20:20 40 *********************
74 2019-09-26 20:25 41 **********************
75 2019-09-26 20:30 40 *********************
76 2019-09-26 20:35 41 **********************
77 2019-09-26 20:40 41 **********************
78 2019-09-26 20:45 42 ***********************
79 2019-09-26 20:50 42 ***********************
80 2019-09-26 20:55 43 ************************
81 2019-09-26 21:00 44 *************************
82 2019-09-26 21:05 43 ************************
... ..( 4 skipped). .. ************************
87 2019-09-26 21:30 43 ************************
88 2019-09-26 21:35 44 *************************
... ..( 3 skipped). .. *************************
92 2019-09-26 21:55 44 *************************
93 2019-09-26 22:00 45 **************************
94 2019-09-26 22:05 43 ************************
95 2019-09-26 22:10 43 ************************
96 2019-09-26 22:15 43 ************************
97 2019-09-26 22:20 44 *************************
... ..( 6 skipped). .. *************************
104 2019-09-26 22:55 44 *************************
105 2019-09-26 23:00 43 ************************
106 2019-09-26 23:05 43 ************************
107 2019-09-26 23:10 42 ***********************
108 2019-09-26 23:15 41 **********************
109 2019-09-26 23:20 41 **********************
110 2019-09-26 23:25 41 **********************
111 2019-09-26 23:30 40 *********************
112 2019-09-26 23:35 41 **********************
113 2019-09-26 23:40 42 ***********************
114 2019-09-26 23:45 42 ***********************
115 2019-09-26 23:50 43 ************************
116 2019-09-26 23:55 43 ************************
117 2019-09-27 00:00 43 ************************
118 2019-09-27 00:05 42 ***********************
119 2019-09-27 00:10 42 ***********************
120 2019-09-27 00:15 41 **********************
121 2019-09-27 00:20 41 **********************
122 2019-09-27 00:25 40 *********************
123 2019-09-27 00:30 41 **********************
124 2019-09-27 00:35 41 **********************
125 2019-09-27 00:40 41 **********************
126 2019-09-27 00:45 42 ***********************
127 2019-09-27 00:50 42 ***********************
0 2019-09-27 00:55 43 ************************
1 2019-09-27 01:00 43 ************************
2 2019-09-27 01:05 43 ************************
3 2019-09-27 01:10 42 ***********************
4 2019-09-27 01:15 32 *************
5 2019-09-27 01:20 32 *************
6 2019-09-27 01:25 33 **************
7 2019-09-27 01:30 33 **************
8 2019-09-27 01:35 30 ***********
9 2019-09-27 01:40 31 ************
10 2019-09-27 01:45 32 *************
11 2019-09-27 01:50 33 **************
12 2019-09-27 01:55 33 **************
13 2019-09-27 02:00 33 **************
14 2019-09-27 02:05 34 ***************
15 2019-09-27 02:10 30 ***********
16 2019-09-27 02:15 31 ************
17 2019-09-27 02:20 32 *************
18 2019-09-27 02:25 33 **************
19 2019-09-27 02:30 32 *************
20 2019-09-27 02:35 32 *************
SCT Error Recovery Control:
Read: Disabled
Write: Disabled
Device Statistics (GP/SMART Log 0x04) not supported
ATA_READ_LOG_EXT (addr=0x11:0x00, page=0, n=1) failed: 48-bit ATA commands require SAT ATA PASS-THROUGH (16)
Read SATA Phy Event Counters failed
More information about the Smartmontools-database
mailing list