[Smartmontools-database] maybe a new device [SanDisk SSD Plus]
Alfred Ganz
alfred-ganz+smartm at agci.com
Sun Jul 14 18:57:27 CEST 2019
Ladies and Gentlemen,
I have reported on this device earlier but I was finally able to extract
the device from the Linux context and look at it with the latest version
of the SanDisk Dashboard which requires Windows, but doesn't work well
with Windows 7. In the process I was able to upgrade the firmware and
some of the problems that I reported on earlier have disappeared.
The Dashboard also provides a list of the Vendor Specific SMART Attributes
as defined by the vendor (attached). Since the short test now works I have
also appended a new version of the smartctl report.
Finally, I have searched the drivedb for a possible entry for the device.
It looks like SanDisk is in the process of moving toward Western Digital,
no big surprise. It looks like the "WD Blue and Green SSDs" group might be
a good target for the device although the "Marvell based SanDisk SSDs"
group might work too. In the end I decided to add my own entry, a context
diff for which I have also attached. However, I will not be offended if
you choose to add the device in an other way.
Please let me know if I can help with some other information.
Hope this helps, AG
--
----------------------------------------------------------------------
Alfred Ganz alfred-ganz:at:agci.com
AG Consulting (203) 624-9667
440 Prospect Street # 11
New Haven, CT 06511
----------------------------------------------------------------------
-------------- next part --------------
5 Reassigned block count 0
9 Power On Count 4788
12 Drive Power Cycle Count 464
165 SLC Block Erase Count f1
166 Minimum P/E Cycles 4
167 Maximum Bad Blocks per Die 0
168 Maximum P/E Cycles 6
169 Total Bad Blocks 67
170 Grown Bad Blocks 0
171 Program Fail Count 0
172 Erase Fail Count 0
173 Average P/E Cycles 4
174 Unexpected Power Loss Count 358
184 <not reported>
187 UECC Count 1209
188 Command Timeout Count 0
194 Temperature 95 F|35 C
199 Sata CRC Errors 0
230 Media Wearout Indicator 0.68 %
232 Available Reserve Space 100 %
233 NAND GB Written to TLC 483
234 NAND GB Written to SLC 1345
241 Total GB Written [Host] 519
242 Total GB Read [Host] 423
244 Temperature Throttle Status Off
-------------- next part --------------
smartctl 7.0 2018-12-30 r4883 [x86_64-linux-3.10.0-957.21.3.el7.x86_64] (local build)
Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: SanDisk SSD PLUS 120 GB
Firmware Version: UE4500RL
User Capacity: 120,040,980,480 bytes [120 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
Form Factor: 2.5 inches
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: ACS-2 T13/2015-D revision 3
SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Sun Jul 14 11:53:03 2019 EDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM feature is: Disabled
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, NOT FROZEN [SEC1]
Wt Cache Reorder: Unavailable
=== START OF READ SMART DATA SECTION ===
SMART Status not supported: Incomplete response, ATA output registers missing
SMART overall-health self-assessment test result: PASSED
Warning: This result is based on an Attribute check.
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 120) seconds.
Offline data collection
capabilities: (0x15) SMART execute Offline immediate.
No Auto Offline data collection support.
Abort Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
No Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 21) minutes.
SMART Attributes Data Structure revision number: 1
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
5 Reallocated_Sector_Ct -O--CK 100 100 000 - 0
9 Power_On_Hours -O--CK 100 100 000 - 4808
12 Power_Cycle_Count -O--CK 100 100 000 - 467
165 Unknown_Attribute -O--CK 100 100 000 - 241
166 Unknown_Attribute -O--CK 100 100 --- - 4
167 Unknown_Attribute -O--CK 100 100 --- - 0
168 Unknown_Attribute -O--CK 100 100 --- - 6
169 Unknown_Attribute -O--CK 100 100 --- - 67
170 Unknown_Attribute -O--CK 100 100 --- - 0
171 Unknown_Attribute -O--CK 100 100 000 - 0
172 Unknown_Attribute -O--CK 100 100 000 - 0
173 Unknown_Attribute -O--CK 100 100 000 - 4
174 Unknown_Attribute -O--CK 100 100 000 - 361
184 End-to-End_Error -O--CK 100 100 --- - 0
187 Reported_Uncorrect -O--CK 100 100 000 - 1209
188 Command_Timeout -O--CK 100 100 --- - 0
194 Temperature_Celsius -O---K 059 047 000 - 41 (Min/Max 0/47)
199 UDMA_CRC_Error_Count -O--CK 100 100 --- - 0
230 Unknown_SSD_Attribute -O--CK 100 100 000 - 292063019076
232 Available_Reservd_Space PO--CK 100 100 005 - 100
233 Media_Wearout_Indicator -O--CK 100 100 --- - 483
234 Unknown_Attribute -O--CK 100 100 000 - 1345
241 Total_LBAs_Written ----CK 100 100 000 - 519
242 Total_LBAs_Read ----CK 100 100 000 - 423
244 Unknown_Attribute -O--CK 000 100 --- - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 1 Comprehensive SMART error log
0x03 GPL R/O 16 Ext. Comprehensive SMART error log
0x04 GPL,SL R/O 8 Device Statistics log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 1 Extended self-test log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xa1 GPL,SL VS 1 Device vendor specific log
0xa2 GPL,SL VS 2 Device vendor specific log
0xa3 GPL,SL VS 1 Device vendor specific log
0xa7 GPL,SL VS 1 Device vendor specific log
0xa9 GPL,SL VS 3 Device vendor specific log
SMART Extended Comprehensive Error Log Version: 1 (16 sectors)
Device Error Count: 1209 (device log contains only the most recent 64 errors)
CR = Command Register
FEATR = Features Register
COUNT = Count (was: Sector Count) Register
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
LH = LBA High (was: Cylinder High) Register ] LBA
LM = LBA Mid (was: Cylinder Low) Register ] Register
LL = LBA Low (was: Sector Number) Register ]
DV = Device (was: Device/Head) Register
DC = Device Control Register
ER = Error register
ST = Status register
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 1209 [3] occurred at disk power-on lifetime: 4304 hours (179 days + 8 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 00 00 0f 60 40 00 Error: UNC at LBA = 0x00000f60 = 3936
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 00 08 00 00 00 00 0f 60 40 00 00:08:38.453 READ DMA EXT
25 00 00 00 08 00 00 00 00 0f 60 40 00 00:08:38.298 READ DMA EXT
25 00 00 00 08 00 00 00 00 0f 60 40 00 00:08:38.092 READ DMA EXT
25 00 00 00 08 00 00 00 00 0f 60 40 00 00:08:37.923 READ DMA EXT
25 00 00 00 08 00 00 00 00 0f 60 40 00 00:02:11.650 READ DMA EXT
Error 1208 [2] occurred at disk power-on lifetime: 4304 hours (179 days + 8 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 00 00 0f 60 40 00 Error: UNC at LBA = 0x00000f60 = 3936
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 00 08 00 00 00 00 0f 60 40 00 00:08:38.298 READ DMA EXT
25 00 00 00 08 00 00 00 00 0f 60 40 00 00:08:38.092 READ DMA EXT
25 00 00 00 08 00 00 00 00 0f 60 40 00 00:08:37.923 READ DMA EXT
25 00 00 00 08 00 00 00 00 0f 60 40 00 00:02:11.650 READ DMA EXT
25 00 00 00 08 00 00 00 00 0f 60 40 00 00:02:11.480 READ DMA EXT
Error 1207 [1] occurred at disk power-on lifetime: 4304 hours (179 days + 8 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 00 00 0f 60 40 00 Error: UNC at LBA = 0x00000f60 = 3936
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 00 08 00 00 00 00 0f 60 40 00 00:08:38.092 READ DMA EXT
25 00 00 00 08 00 00 00 00 0f 60 40 00 00:08:37.923 READ DMA EXT
25 00 00 00 08 00 00 00 00 0f 60 40 00 00:02:11.650 READ DMA EXT
25 00 00 00 08 00 00 00 00 0f 60 40 00 00:02:11.480 READ DMA EXT
25 00 00 00 08 00 00 00 00 0f 60 40 00 00:02:11.305 READ DMA EXT
Error 1206 [0] occurred at disk power-on lifetime: 4304 hours (179 days + 8 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 00 00 0f 60 40 00 Error: UNC at LBA = 0x00000f60 = 3936
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 00 08 00 00 00 00 0f 60 40 00 00:08:37.923 READ DMA EXT
25 00 00 00 08 00 00 00 00 0f 60 40 00 00:02:11.650 READ DMA EXT
25 00 00 00 08 00 00 00 00 0f 60 40 00 00:02:11.480 READ DMA EXT
25 00 00 00 08 00 00 00 00 0f 60 40 00 00:02:11.305 READ DMA EXT
25 00 00 00 08 00 00 00 00 0f 60 40 00 00:02:11.125 READ DMA EXT
Warning! SMART Extended Comprehensive Error Log Structure error: invalid SMART checksum.
Error 1205 [63] occurred at disk power-on lifetime: 61166 hours (2548 days + 14 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
00 -- 00 00 00 00 00 00 00 00 00 00 00
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
00 00 00 00 00 00 00 00 00 00 00 00 45 16d+13:40:55.765 NOP [Abort queued commands]
00 00 00 00 00 00 00 00 00 00 00 00 44 13d+06:08:44.612 NOP [Abort queued commands]
00 00 00 00 00 00 00 00 00 00 00 00 43 9d+22:36:33.459 NOP [Abort queued commands]
00 00 00 00 00 00 00 00 00 00 00 00 42 6d+15:04:22.306 NOP [Abort queued commands]
00 00 00 00 00 00 00 00 00 00 00 00 41 3d+07:32:11.153 NOP [Abort queued commands]
Error 1204 [62] occurred at disk power-on lifetime: 61166 hours (2548 days + 14 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
00 -- 00 00 00 00 00 00 00 00 00 00 00
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
00 00 00 00 00 00 00 00 00 00 00 00 35 16d+13:40:55.765 NOP [Abort queued commands]
00 00 00 00 00 00 00 00 00 00 00 00 34 13d+06:08:44.612 NOP [Abort queued commands]
00 00 00 00 00 00 00 00 00 00 00 00 33 9d+22:36:33.459 NOP [Abort queued commands]
00 00 00 00 00 00 00 00 00 00 00 00 32 6d+15:04:22.306 NOP [Abort queued commands]
00 00 00 00 00 00 00 00 00 00 00 00 31 3d+07:32:11.153 NOP [Abort queued commands]
Error 1203 [61] occurred at disk power-on lifetime: 61166 hours (2548 days + 14 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
00 -- 00 00 00 00 00 00 00 00 00 00 00
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
00 00 00 00 00 00 00 00 00 00 00 00 25 16d+13:40:55.765 NOP [Abort queued commands]
00 00 00 00 00 00 00 00 00 00 00 00 24 13d+06:08:44.612 NOP [Abort queued commands]
00 00 00 00 00 00 00 00 00 00 00 00 23 9d+22:36:33.459 NOP [Abort queued commands]
00 00 00 00 00 00 00 00 00 00 00 00 22 6d+15:04:22.306 NOP [Abort queued commands]
00 00 00 00 00 00 00 00 00 00 00 00 21 3d+07:32:11.153 NOP [Abort queued commands]
Error 1202 [60] occurred at disk power-on lifetime: 43981 hours (1832 days + 13 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
00 -- 00 00 00 00 00 00 00 00 00 00 00
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
00 00 00 00 00 00 00 00 00 00 00 00 15 16d+13:40:55.765 NOP [Abort queued commands]
00 00 00 00 00 00 00 00 00 00 00 00 14 13d+06:08:44.612 NOP [Abort queued commands]
00 00 00 00 00 00 00 00 00 00 00 00 13 9d+22:36:33.459 NOP [Abort queued commands]
00 00 00 00 00 00 00 00 00 00 00 00 12 6d+15:04:22.306 NOP [Abort queued commands]
00 00 00 00 00 00 00 00 00 00 00 00 11 3d+07:32:11.153 NOP [Abort queued commands]
SMART Extended Self-test Log Version: 1 (1 sectors)
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 4809 -
# 2 Extended offline Completed without error 00% 4790 -
# 3 Short offline Completed without error 00% 4789 -
# 4 Short offline Aborted by host 90% 4789 -
# 5 Short offline Aborted by host 70% 4789 -
# 6 Short offline Completed without error 00% 4788 -
# 7 Extended offline Completed without error 00% 4788 -
# 8 Extended offline Completed without error 00% 4787 -
# 9 Short offline Completed without error 00% 4787 -
#10 Short offline Fatal or unknown error 90% 4289 0
#11 Short offline Fatal or unknown error 90% 4265 0
#12 Short offline Fatal or unknown error 90% 4249 0
#13 Short offline Fatal or unknown error 90% 4233 0
#14 Extended offline Fatal or unknown error 90% 4193 0
#15 Short offline Fatal or unknown error 90% 4170 0
#16 Short offline Fatal or unknown error 90% 4098 0
#17 Short offline Fatal or unknown error 90% 4074 0
#18 Short offline Fatal or unknown error 90% 4050 0
#19 Extended offline Fatal or unknown error 90% 4025 0
10 of 10 failed self-tests are outdated by newer successful extended offline self-test # 2
Selective Self-tests/Logging not supported
SCT Commands not supported
Device Statistics (GP Log 0x04)
Page Offset Size Value Flags Description
0x01 ===== = = === == General Statistics (rev 1) ==
0x01 0x008 4 467 --- Lifetime Power-On Resets
0x01 0x010 4 4808 --- Power-on Hours
0x01 0x018 6 1089611502 --- Logical Sectors Written
0x01 0x028 6 888640692 --- Logical Sectors Read
0x01 0x038 6 4809 --- Date and Time TimeStamp
0x05 ===== = = === == Temperature Statistics (rev 1) ==
0x05 0x008 1 41 --- Current Temperature
0x05 0x010 1 - --- Average Short Term Temperature
0x05 0x018 1 - --- Average Long Term Temperature
0x05 0x020 1 46 --- Highest Temperature
0x05 0x028 1 20 --- Lowest Temperature
0x05 0x030 1 42 --- Highest Average Short Term Temperature
0x05 0x038 1 42 --- Lowest Average Short Term Temperature
0x05 0x040 1 37 --- Highest Average Long Term Temperature
0x05 0x048 1 37 --- Lowest Average Long Term Temperature
0x05 0x050 4 0 --- Time in Over-Temperature
0x05 0x058 1 95 --- Specified Maximum Operating Temperature
0x05 0x060 4 0 --- Time in Under-Temperature
0x05 0x068 1 0 --- Specified Minimum Operating Temperature
0x07 ===== = = === == Solid State Device Statistics (rev 1) ==
0x07 0x008 1 0 N-- Percentage Used Endurance Indicator
|||_ C monitored condition met
||__ D supports DSN
|___ N normalized value
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
0x0009 2 3 Transition from drive PhyRdy to drive PhyNRdy
0x000a 2 4 Device-to-host register FISes sent due to a COMRESET
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
0x0001 2 0 Command failed due to ICRC error
-------------- next part --------------
*** drivedb.h.orig 2019-07-12 14:17:36.238986777 -0400
--- drivedb.h 2019-07-14 12:39:52.477618591 -0400
***************
*** 1788,1793 ****
--- 1788,1826 ----
"-v 244,raw48,Thermal_Throttle "
"-v 249,raw48,TLC_NAND_GB_Writes"
},
+ { "Trying to run my own based on the Sandisk Dashboard report",
+ "SanDisk SSD PLUS (120|240|480) GB", // SanDisk SSD Plus, tested with SanDisk SSD PLUS 120 GB by ##AG##
+ "", "",
+ // origin: WD Blue and Green SSDs
+ // Marvell based SanDisk SSDs
+ // SandForce Driven SSDs, Note not Corsair Force LS
+ // WD M S
+ "-v 5,raw48,Reassigned_Block_Count " // * ? *
+ //"-v 9,raw24(raw8),Power_On_Hours " // * *
+ //"-v 12,raw48,Power_Cycle_Count " // * * *
+ "-v 165,raw48,SLC_Block_Erase_Count " // * *
+ "-v 166,raw48,Minmum_PE_Cycles " // * *
+ "-v 167,raw48,Max_Bad_Blocks_per_Die " // * ?
+ "-v 168,raw48,Maximum_PE_Cycles " // * *
+ "-v 169,raw48,Total_Bad_Blocks " // * *
+ "-v 170,raw48,Grown_Bad_Blocks " // *
+ "-v 171,raw48,Program_Fail_Count " // * * *
+ "-v 172,raw48,Erase_Fail_Count " // * * *
+ "-v 173,raw48,Average_PE_Cycles " // * *
+ "-v 174,raw48,Unexpected_Pwr_Loss_Ct " // * * *
+ //"-v 184,,is not reported by Dashboard " // * * End_to_End_error
+ "-v 187,raw48,UECC_Count " //
+ //"-v 188,raw48,Command_Timeout_Count " // * *
+ //"-v 194,tempminmax,Temperature_Celsius " // * * *
+ "-v 199,raw48,SATA_CRC_Errors " // * *
+ "-v 230,raw16,Media_Wearout_Ind_Pct " // * ? *
+ "-v 232,raw48,Avail_Reserve_Space_Pct " // * * *
+ "-v 233,raw48,NAND_GB_Written_to_TLC " // * *
+ "-v 234,raw48,NAND_GB_Written_to_SLC " // *
+ "-v 241,raw48,Total_Writes_GiB " // * * *
+ "-v 242,raw48,Total_Reads_GiB " // * * *
+ "-v 244,raw48,Temp_Throttle_Status" // * * *
+ },
{ "SanDisk based SSDs", // see also #463 for the vendor attribute description
"SanDisk iSSD P4 [0-9]*GB|" // tested with SanDisk iSSD P4 16GB/SSD 9.14
"SanDisk pSSD|" // tested with SandDisk pSSD/3 (62.7 GB, SanDisk Extreme USB3.0 SDCZ80-064G-J57, 0x0781:0x5580)
More information about the Smartmontools-database
mailing list