[Smartmontools-database] ADATA SU650
Gabriel Góes
gcgoes at gmail.com
Wed Aug 28 01:29:40 CEST 2019
smartctl 7.0 2018-12-30 r4883 [x86_64-linux-4.4.13] (local build)
Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: ADATA SU650
Firmware Version: V8X01c45
User Capacity: 120,034,123,776 bytes [120 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
Form Factor: 2.5 inches
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: ACS-3, ATA8-ACS T13/1699-D revision 6
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Tue Aug 27 20:14:25 2019 GMT+3
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM feature is: Unavailable
Rd look-ahead is: Disabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, NOT FROZEN [SEC1]
Wt Cache Reorder: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 1) seconds.
Offline data collection
capabilities: (0x59) SMART execute Offline immediate.
No Auto Offline data collection support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0002) Does not save SMART data before
entering power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 3) minutes.
Extended self-test routine
recommended polling time: ( 11) minutes.
SCT capabilities: (0x0039) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-K 100 100 050 - 0
5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0
9 Power_On_Hours -O--CK 100 100 000 - 283
12 Power_Cycle_Count -O--CK 100 100 000 - 9
161 Unknown_Attribute -O--CK 100 100 000 - 0
162 Unknown_Attribute -O--CK 100 100 000 - 23614
163 Unknown_Attribute -O--CK 100 100 000 - 100
164 Unknown_Attribute -O--CK 100 100 000 - 50
166 Unknown_Attribute -O--CK 100 100 000 - 99
167 Unknown_Attribute -O--CK 100 100 050 - 0
168 Unknown_Attribute -O--CK 100 100 000 - 0
169 Unknown_Attribute -O--CK 100 100 000 - 100
171 Unknown_Attribute -O--CK 100 100 000 - 0
172 Unknown_Attribute -O--CK 100 100 000 - 0
174 Unknown_Attribute -O--CK 100 100 000 - 7
175 Program_Fail_Count_Chip -O--CK 100 100 000 - 0
181 Program_Fail_Cnt_Total -O---K 100 100 000 - 54901
187 Reported_Uncorrect -O--CK 100 100 000 - 0
194 Temperature_Celsius -O---K 100 100 030 - 46
195 Hardware_ECC_Recovered -O-RCK 100 100 000 - 0
196 Reallocated_Event_Count -O--CK 100 100 000 - 0
199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0
206 Unknown_SSD_Attribute -O--CK 100 100 000 - 0
207 Unknown_SSD_Attribute -O--CK 100 100 000 - 70
232 Available_Reservd_Space -O--CK 100 100 000 - 100
241 Total_LBAs_Written -O--CK 100 100 000 - 1064
242 Total_LBAs_Read -O--CK 100 100 000 - 781
249 Unknown_Attribute -O--CK 100 100 000 - 1223
250 Read_Error_Retry_Rate -O--CK 100 100 000 - 1104
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 1 Comprehensive SMART error log
0x03 GPL R/O 2 Ext. Comprehensive SMART error log
0x04 GPL,SL R/O 5 Device Statistics log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 1 Extended self-test log
0x09 SL R/W 1 Selective self-test log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x30 GPL,SL R/O 8 IDENTIFY DEVICE data log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (2 sectors)
No Errors Logged
SMART Extended Self-test Log Version: 1 (1 sectors)
Num Test_Description Status Remaining
LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 282 -
SMART Selective self-test log data structure revision number 0
Note: revision number not 1 implies that no selective self-test has
ever been run
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 3
SCT Version (vendor specific): 0 (0x0000)
Device State: Active (0)
Current Temperature: 0 Celsius
Power Cycle Min/Max Temperature: 28/28 Celsius
Lifetime Min/Max Temperature: 0/37 Celsius
Specified Max Operating Temperature: 100 Celsius
Under/Over Temperature Limit Count: 0/0
SCT Temperature History Version: 2
Temperature Sampling Period: 0 minutes
Temperature Logging Interval: 0 minutes
Min/Max recommended Temperature: 0/100 Celsius
Min/Max Temperature Limit: -10/125 Celsius
Temperature History Size (Index): 128 (2)
Index Estimated Time Temperature Celsius
3 2019-08-27 18:07 ? -
... ..(123 skipped). .. -
127 2019-08-27 20:11 ? -
0 2019-08-27 20:12 36 *****************
1 2019-08-27 20:13 ? -
2 2019-08-27 20:14 38 *******************
SCT Error Recovery Control:
Read: Disabled
Write: Disabled
Device Statistics (GP Log 0x04)
Page Offset Size Value Flags Description
0x01 ===== = = === == General Statistics (rev 1) ==
0x01 0x008 4 9 --- Lifetime Power-On Resets
0x01 0x010 4 283 --- Power-on Hours
0x01 0x018 6 2232497157 --- Logical Sectors Written
0x01 0x020 6 17724446 --- Number of Write Commands
0x01 0x028 6 1639898282 --- Logical Sectors Read
0x01 0x030 6 14586779 --- Number of Read Commands
0x01 0x038 6 1015678418 --- Date and Time TimeStamp
0x04 ===== = = === == General Errors Statistics (rev 1) ==
0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors
0x04 0x010 4 0 --- Resets Between Cmd Acceptance and
Completion
0x06 ===== = = === == Transport Statistics (rev 1) ==
0x06 0x008 4 22 --- Number of Hardware Resets
0x06 0x018 4 0 --- Number of Interface CRC Errors
0x07 ===== = = === == Solid State Device Statistics (rev 1) ==
0x07 0x008 1 32 --- Percentage Used Endurance Indicator
|||_ C monitored condition met
||__ D supports DSN
|___ N normalized value
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 4 0 Command failed due to ICRC error
0x000a 4 22 Device-to-host register FISes sent due to a COMRESET
-------------- next part --------------
smartctl 7.0 2018-12-30 r4883 [x86_64-linux-4.4.13] (local build)
Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: ADATA SU650
Firmware Version: V8X01c45
User Capacity: 120,034,123,776 bytes [120 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
Form Factor: 2.5 inches
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: ACS-3, ATA8-ACS T13/1699-D revision 6
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Tue Aug 27 20:14:25 2019 GMT+3
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM feature is: Unavailable
Rd look-ahead is: Disabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, NOT FROZEN [SEC1]
Wt Cache Reorder: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 1) seconds.
Offline data collection
capabilities: (0x59) SMART execute Offline immediate.
No Auto Offline data collection support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0002) Does not save SMART data before
entering power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 3) minutes.
Extended self-test routine
recommended polling time: ( 11) minutes.
SCT capabilities: (0x0039) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-K 100 100 050 - 0
5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0
9 Power_On_Hours -O--CK 100 100 000 - 283
12 Power_Cycle_Count -O--CK 100 100 000 - 9
161 Unknown_Attribute -O--CK 100 100 000 - 0
162 Unknown_Attribute -O--CK 100 100 000 - 23614
163 Unknown_Attribute -O--CK 100 100 000 - 100
164 Unknown_Attribute -O--CK 100 100 000 - 50
166 Unknown_Attribute -O--CK 100 100 000 - 99
167 Unknown_Attribute -O--CK 100 100 050 - 0
168 Unknown_Attribute -O--CK 100 100 000 - 0
169 Unknown_Attribute -O--CK 100 100 000 - 100
171 Unknown_Attribute -O--CK 100 100 000 - 0
172 Unknown_Attribute -O--CK 100 100 000 - 0
174 Unknown_Attribute -O--CK 100 100 000 - 7
175 Program_Fail_Count_Chip -O--CK 100 100 000 - 0
181 Program_Fail_Cnt_Total -O---K 100 100 000 - 54901
187 Reported_Uncorrect -O--CK 100 100 000 - 0
194 Temperature_Celsius -O---K 100 100 030 - 46
195 Hardware_ECC_Recovered -O-RCK 100 100 000 - 0
196 Reallocated_Event_Count -O--CK 100 100 000 - 0
199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0
206 Unknown_SSD_Attribute -O--CK 100 100 000 - 0
207 Unknown_SSD_Attribute -O--CK 100 100 000 - 70
232 Available_Reservd_Space -O--CK 100 100 000 - 100
241 Total_LBAs_Written -O--CK 100 100 000 - 1064
242 Total_LBAs_Read -O--CK 100 100 000 - 781
249 Unknown_Attribute -O--CK 100 100 000 - 1223
250 Read_Error_Retry_Rate -O--CK 100 100 000 - 1104
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 1 Comprehensive SMART error log
0x03 GPL R/O 2 Ext. Comprehensive SMART error log
0x04 GPL,SL R/O 5 Device Statistics log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 1 Extended self-test log
0x09 SL R/W 1 Selective self-test log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x30 GPL,SL R/O 8 IDENTIFY DEVICE data log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (2 sectors)
No Errors Logged
SMART Extended Self-test Log Version: 1 (1 sectors)
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 282 -
SMART Selective self-test log data structure revision number 0
Note: revision number not 1 implies that no selective self-test has ever been run
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 3
SCT Version (vendor specific): 0 (0x0000)
Device State: Active (0)
Current Temperature: 0 Celsius
Power Cycle Min/Max Temperature: 28/28 Celsius
Lifetime Min/Max Temperature: 0/37 Celsius
Specified Max Operating Temperature: 100 Celsius
Under/Over Temperature Limit Count: 0/0
SCT Temperature History Version: 2
Temperature Sampling Period: 0 minutes
Temperature Logging Interval: 0 minutes
Min/Max recommended Temperature: 0/100 Celsius
Min/Max Temperature Limit: -10/125 Celsius
Temperature History Size (Index): 128 (2)
Index Estimated Time Temperature Celsius
3 2019-08-27 18:07 ? -
... ..(123 skipped). .. -
127 2019-08-27 20:11 ? -
0 2019-08-27 20:12 36 *****************
1 2019-08-27 20:13 ? -
2 2019-08-27 20:14 38 *******************
SCT Error Recovery Control:
Read: Disabled
Write: Disabled
Device Statistics (GP Log 0x04)
Page Offset Size Value Flags Description
0x01 ===== = = === == General Statistics (rev 1) ==
0x01 0x008 4 9 --- Lifetime Power-On Resets
0x01 0x010 4 283 --- Power-on Hours
0x01 0x018 6 2232497157 --- Logical Sectors Written
0x01 0x020 6 17724446 --- Number of Write Commands
0x01 0x028 6 1639898282 --- Logical Sectors Read
0x01 0x030 6 14586779 --- Number of Read Commands
0x01 0x038 6 1015678418 --- Date and Time TimeStamp
0x04 ===== = = === == General Errors Statistics (rev 1) ==
0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors
0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion
0x06 ===== = = === == Transport Statistics (rev 1) ==
0x06 0x008 4 22 --- Number of Hardware Resets
0x06 0x018 4 0 --- Number of Interface CRC Errors
0x07 ===== = = === == Solid State Device Statistics (rev 1) ==
0x07 0x008 1 32 --- Percentage Used Endurance Indicator
|||_ C monitored condition met
||__ D supports DSN
|___ N normalized value
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 4 0 Command failed due to ICRC error
0x000a 4 22 Device-to-host register FISes sent due to a COMRESET
More information about the Smartmontools-database
mailing list