[Smartmontools-database] Smartctl Device submission
web.tobias at hilbig-ffb.de
web.tobias at hilbig-ffb.de
Tue Apr 23 17:10:43 CEST 2019
Hi,
I attached the log and a working (modified) database entry.
It is a Western Digital WD Red 10TB device from 2019. The only unknown
attribute seems to be the helium level, which is already included in the
database.
regards,
Tobi
-------------- next part --------------
smartctl 6.6 2017-11-05 r4594 [x86_64-linux-4.19.0-4-amd64] (local build)
Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: WDC WD100EFAX-68LHPN0
Firmware Version: 83.H0A83
User Capacity: 10,000,831,348,736 bytes [10.0 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5400 rpm
Form Factor: 3.5 inches
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4
SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Tue Apr 23 17:01:05 2019 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM feature is: Disabled
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, frozen [SEC2]
Wt Cache Reorder: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 93) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: (1257) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 0
2 Throughput_Performance --S--- 129 129 054 - 112
3 Spin_Up_Time POS--- 100 100 024 - 0
4 Start_Stop_Count -O--C- 100 100 000 - 8
5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0
7 Seek_Error_Rate -O-R-- 100 100 067 - 0
8 Seek_Time_Performance --S--- 128 128 020 - 18
9 Power_On_Hours -O--C- 100 100 000 - 346
10 Spin_Retry_Count -O--C- 100 100 060 - 0
12 Power_Cycle_Count -O--CK 100 100 000 - 8
22 Unknown_Attribute PO---K 100 100 025 - 100
192 Power-Off_Retract_Count -O--CK 100 100 000 - 109
193 Load_Cycle_Count -O--C- 100 100 000 - 109
194 Temperature_Celsius -O---- 185 185 000 - 35 (Min/Max 16/41)
196 Reallocated_Event_Count -O--CK 100 100 000 - 0
197 Current_Pending_Sector -O---K 100 100 000 - 0
198 Offline_Uncorrectable ---R-- 100 100 000 - 0
199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 1 Comprehensive SMART error log
0x03 GPL R/O 1 Ext. Comprehensive SMART error log
0x04 GPL R/O 256 Device Statistics log
0x04 SL R/O 255 Device Statistics log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 1 Extended self-test log
0x08 GPL R/O 2 Power Conditions log
0x09 SL R/W 1 Selective self-test log
0x0c GPL R/O 5501 Pending Defects log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x12 GPL R/O 1 SATA NCQ Non-Data log
0x13 GPL R/O 1 SATA NCQ Send and Receive log
0x15 GPL R/W 1 Rebuild Assist log
0x21 GPL R/O 1 Write stream error log
0x22 GPL R/O 1 Read stream error log
0x24 GPL R/O 256 Current Device Internal Status Data log
0x25 GPL R/O 256 Saved Device Internal Status Data log
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (1 sectors)
No Errors Logged
SMART Extended Self-test Log Version: 1 (1 sectors)
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 336 -
# 2 Short offline Completed without error 00% 312 -
# 3 Short offline Completed without error 00% 288 -
# 4 Short offline Completed without error 00% 264 -
# 5 Short offline Completed without error 00% 240 -
# 6 Short offline Completed without error 00% 216 -
# 7 Short offline Completed without error 00% 212 -
# 8 Short offline Completed without error 00% 188 -
# 9 Short offline Completed without error 00% 164 -
#10 Short offline Completed without error 00% 140 -
#11 Short offline Completed without error 00% 116 -
#12 Short offline Completed without error 00% 92 -
#13 Extended offline Completed without error 00% 32 -
#14 Short offline Completed without error 00% 0 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 3
SCT Version (vendor specific): 256 (0x0100)
SCT Support Level: 0
Device State: Active (0)
Current Temperature: 35 Celsius
Power Cycle Min/Max Temperature: 19/40 Celsius
Lifetime Min/Max Temperature: 16/41 Celsius
Under/Over Temperature Limit Count: 0/0
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 1 minute
Min/Max recommended Temperature: 0/65 Celsius
Min/Max Temperature Limit: -40/70 Celsius
Temperature History Size (Index): 128 (120)
Index Estimated Time Temperature Celsius
121 2019-04-23 14:54 37 ******************
122 2019-04-23 14:55 37 ******************
123 2019-04-23 14:56 37 ******************
124 2019-04-23 14:57 36 *****************
125 2019-04-23 14:58 37 ******************
... ..( 13 skipped). .. ******************
11 2019-04-23 15:12 37 ******************
12 2019-04-23 15:13 36 *****************
13 2019-04-23 15:14 36 *****************
14 2019-04-23 15:15 37 ******************
... ..( 12 skipped). .. ******************
27 2019-04-23 15:28 37 ******************
28 2019-04-23 15:29 36 *****************
29 2019-04-23 15:30 37 ******************
... ..( 13 skipped). .. ******************
43 2019-04-23 15:44 37 ******************
44 2019-04-23 15:45 36 *****************
45 2019-04-23 15:46 37 ******************
... ..( 13 skipped). .. ******************
59 2019-04-23 16:00 37 ******************
60 2019-04-23 16:01 36 *****************
61 2019-04-23 16:02 36 *****************
62 2019-04-23 16:03 37 ******************
... ..( 26 skipped). .. ******************
89 2019-04-23 16:30 37 ******************
90 2019-04-23 16:31 36 *****************
... ..( 26 skipped). .. *****************
117 2019-04-23 16:58 36 *****************
118 2019-04-23 16:59 35 ****************
119 2019-04-23 17:00 35 ****************
120 2019-04-23 17:01 37 ******************
SCT Error Recovery Control:
Read: 70 (7.0 seconds)
Write: 70 (7.0 seconds)
Device Statistics (GP/SMART Log 0x04) not supported
Pending Defects log (GP Log 0x0c) supported [please try: '-l defects']
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 2 0 Command failed due to ICRC error
0x0002 2 0 R_ERR response for data FIS
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0005 2 0 R_ERR response for non-data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
0x0008 2 0 Device-to-host non-data FIS retries
0x0009 2 1 Transition from drive PhyRdy to drive PhyNRdy
0x000a 2 1 Device-to-host register FISes sent due to a COMRESET
0x000b 2 0 CRC errors within host-to-device FIS
0x000d 2 0 Non-CRC errors within host-to-device FIS
-------------- next part --------------
{ "Western Digital Red", // tested with WDC WD10EFRX-68JCSN0/01.01A01,
// WDC WD10JFCX-68N6GN0/01.01A01, WDC WD30EFRX-68EUZN0/82.00A82,
// WDC WD40EFRX-68WT0N0/80.00A80, WDC WD60EFRX-68MYMN1/82.00A82,
// WDC WD80EFAX-68LHPN0/83.H0A83, WDC WD80EFZX-68UW8N0/83.H0A83,
// WDC WD80EZZX-11CSGA0/83.H0A03 (My Book 0x1058:0x25ee)
"WDC WD(100EFA|7500BFC|10JFC|[1-6]0EFR|80E[FZ][AZ])X-.*",
"", "",
"-v 22,raw48,Helium_Level" // WD80EFZX
},
More information about the Smartmontools-database
mailing list