[Smartmontools-database] BUFFALO HD-PNTU3

[Mathieu Malaterre]

Hi,

SAT seems to be working for me:

$ sudo smartctl -a -d sat /dev/sdc
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.14.0-0.bpo.3-amd64] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Toshiba 2.5" HDD MQ01ABD...
Device Model:     TOSHIBA MQ01ABD100
Serial Number:    Y29EF342S
LU WWN Device Id: 5 000039 466e01fe5
Firmware Version: AX0A1U
User Capacity:    1,000,204,886,016 bytes [1.00 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    5400 rpm
Form Factor:      2.5 inches
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ATA8-ACS (minor revision not indicated)
SATA Version is:  SATA 2.6, 3.0 Gb/s (current: 3.0 Gb/s)
Local Time is:    Sun Mar 25 14:10:42 2018 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (  120) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: (   2) minutes.
Extended self-test routine
recommended polling time: ( 245) minutes.
SCT capabilities:        (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE
UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000b   100   100   050    Pre-fail
Always       -       0
  2 Throughput_Performance  0x0005   100   100   050    Pre-fail
Offline      -       0
  3 Spin_Up_Time            0x0027   100   100   001    Pre-fail
Always       -       2714
  4 Start_Stop_Count        0x0032   100   100   000    Old_age
Always       -       1568
  5 Reallocated_Sector_Ct   0x0033   100   100   050    Pre-fail
Always       -       0
  7 Seek_Error_Rate         0x000b   100   100   050    Pre-fail
Always       -       0
  8 Seek_Time_Performance   0x0005   100   100   050    Pre-fail
Offline      -       0
  9 Power_On_Hours          0x0032   059   059   000    Old_age
Always       -       16469
 10 Spin_Retry_Count        0x0033   131   100   030    Pre-fail
Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age
Always       -       1070
191 G-Sense_Error_Rate      0x0032   100   100   000    Old_age
Always       -       0
192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age
Always       -       286
193 Load_Cycle_Count        0x0032   100   100   000    Old_age
Always       -       5646
194 Temperature_Celsius     0x0022   100   100   000    Old_age
Always       -       35 (Min/Max 13/50)
196 Reallocated_Event_Count 0x0032   100   100   000    Old_age
Always       -       0
197 Current_Pending_Sector  0x0032   100   100   000    Old_age
Always       -       0
198 Offline_Uncorrectable   0x0030   100   100   000    Old_age
Offline      -       0
199 UDMA_CRC_Error_Count    0x0032   200   200   000    Old_age
Always       -       0
220 Disk_Shift              0x0002   100   100   000    Old_age
Always       -       0
222 Loaded_Hours            0x0032   098   098   000    Old_age
Always       -       1042
223 Load_Retry_Count        0x0032   100   100   000    Old_age
Always       -       0
224 Load_Friction           0x0022   100   100   000    Old_age
Always       -       0
226 Load-in_Time            0x0026   100   100   000    Old_age
Always       -       266
240 Head_Flying_Hours       0x0001   100   100   001    Pre-fail
Offline      -       0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
No self-tests have been logged.  [To run self-tests, use: smartctl -t]

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.



for reference:

$ lsusb -d 0411:01e7
Bus 003 Device 021: ID 0411:01e7 BUFFALO INC. (formerly MelCo., Inc.)

Thanks