[Smartmontools-database] Seagate ST1000LM035
Zeljko Jovanovic
zeljkoj at tesla.rcub.bg.ac.rs
Sun Mar 11 01:42:55 CET 2018
smartctl 6.6 2017-11-05 r4594 [x86_64-linux-4.14.22] (local build)
Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: ST1000LM035-1RK172
Firmware Version: LCM2
User Capacity: 1,000,204,886,016 bytes [1.00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5400 rpm
Form Factor: 2.5 inches
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: ACS-3 T13/2161-D revision 3b
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Thu Mar 1 11:51:14 2018 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM level is: 128 (minimum power consumption without standby)
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, frozen [SEC2]
Wt Cache Reorder: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 0) seconds.
Offline data collection
capabilities: (0x71) SMART execute Offline immediate.
No Auto Offline data collection support.
Suspend Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 164) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x3035) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-- 081 064 034 - 129373073
3 Spin_Up_Time PO---- 099 099 000 - 0
4 Start_Stop_Count -O--CK 100 100 020 - 44
5 Reallocated_Sector_Ct PO--CK 100 100 036 - 0
7 Seek_Error_Rate POSR-- 100 253 045 - 991957
9 Power_On_Hours -O--CK 100 100 000 - 98 (232 244 0)
10 Spin_Retry_Count PO--C- 100 100 097 - 0
12 Power_Cycle_Count -O--CK 100 100 020 - 36
184 End-to-End_Error -O--CK 100 100 099 - 0
187 Reported_Uncorrect -O--CK 100 100 000 - 0
188 Command_Timeout -O--CK 100 100 000 - 0
189 High_Fly_Writes -O-RCK 100 100 000 - 0
190 Airflow_Temperature_Cel -O---K 071 052 040 - 29 (Min/Max 19/31)
191 G-Sense_Error_Rate -O--CK 100 100 000 - 1
192 Power-Off_Retract_Count -O--CK 100 100 000 - 4
193 Load_Cycle_Count -O--CK 097 097 000 - 7185
194 Temperature_Celsius -O---K 029 048 000 - 29 (0 18 0 0 0)
196 Reallocated_Event_Count -O--CK 100 100 000 - 0
197 Current_Pending_Sector -O--C- 100 100 000 - 0
198 Offline_Uncorrectable ----C- 100 100 000 - 0
199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0
240 Head_Flying_Hours POSR-- 100 100 030 - 62 (110 215 0)
254 Free_Fall_Sensor -O--CK 100 100 000 - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 5 Comprehensive SMART error log
0x03 GPL R/O 5 Ext. Comprehensive SMART error log
0x04 GPL,SL R/O 8 Device Statistics log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 1 Extended self-test log
0x09 SL R/W 1 Selective self-test log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x21 GPL R/O 1 Write stream error log
0x22 GPL R/O 1 Read stream error log
0x24 GPL R/O 512 Current Device Internal Status Data log
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xa1 GPL,SL VS 24 Device vendor specific log
0xa2 GPL VS 8160 Device vendor specific log
0xa8 GPL,SL VS 136 Device vendor specific log
0xa9 GPL,SL VS 1 Device vendor specific log
0xab GPL VS 1 Device vendor specific log
0xb0 GPL VS 8920 Device vendor specific log
0xbe-0xbf GPL VS 65535 Device vendor specific log
0xc0 GPL,SL VS 1 Device vendor specific log
0xc1 GPL,SL VS 16 Device vendor specific log
0xc2 GPL,SL VS 240 Device vendor specific log
0xc3 GPL,SL VS 8 Device vendor specific log
0xc4 GPL,SL VS 24 Device vendor specific log
0xc9 GPL,SL VS 1 Device vendor specific log
0xca GPL,SL VS 16 Device vendor specific log
0xd3 GPL VS 1920 Device vendor specific log
0xdf GPL,SL VS 1 Device vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (5 sectors)
No Errors Logged
SMART Extended Self-test Log Version: 1 (1 sectors)
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 98 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 3
SCT Version (vendor specific): 522 (0x020a)
SCT Support Level: 1
Device State: Active (0)
Current Temperature: 29 Celsius
Power Cycle Min/Max Temperature: 19/31 Celsius
Lifetime Min/Max Temperature: 18/51 Celsius
Under/Over Temperature Limit Count: 0/19
Vendor specific:
00 00 00 00 00 00 00 00 00 00 02 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 11 minutes
Min/Max recommended Temperature: 0/ 0 Celsius
Min/Max Temperature Limit: 0/ 0 Celsius
Temperature History Size (Index): 128 (61)
Index Estimated Time Temperature Celsius
62 2018-02-28 12:34 29 **********
63 2018-02-28 12:45 30 ***********
... ..( 3 skipped). .. ***********
67 2018-02-28 13:29 30 ***********
68 2018-02-28 13:40 29 **********
... ..( 10 skipped). .. **********
79 2018-02-28 15:41 29 **********
80 2018-02-28 15:52 30 ***********
81 2018-02-28 16:03 30 ***********
82 2018-02-28 16:14 ? -
83 2018-02-28 16:25 19 -
84 2018-02-28 16:36 24 *****
85 2018-02-28 16:47 26 *******
86 2018-02-28 16:58 27 ********
... ..( 7 skipped). .. ********
94 2018-02-28 18:26 27 ********
95 2018-02-28 18:37 28 *********
... ..( 4 skipped). .. *********
100 2018-02-28 19:32 28 *********
101 2018-02-28 19:43 29 **********
102 2018-02-28 19:54 29 **********
103 2018-02-28 20:05 30 ***********
104 2018-02-28 20:16 29 **********
105 2018-02-28 20:27 29 **********
106 2018-02-28 20:38 29 **********
107 2018-02-28 20:49 28 *********
108 2018-02-28 21:00 28 *********
109 2018-02-28 21:11 28 *********
110 2018-02-28 21:22 29 **********
... ..( 3 skipped). .. **********
114 2018-02-28 22:06 29 **********
115 2018-02-28 22:17 30 ***********
116 2018-02-28 22:28 29 **********
117 2018-02-28 22:39 29 **********
118 2018-02-28 22:50 29 **********
119 2018-02-28 23:01 30 ***********
120 2018-02-28 23:12 29 **********
121 2018-02-28 23:23 29 **********
122 2018-02-28 23:34 30 ***********
123 2018-02-28 23:45 33 **************
124 2018-02-28 23:56 ? -
125 2018-03-01 00:07 19 -
126 2018-03-01 00:18 24 *****
127 2018-03-01 00:29 26 *******
0 2018-03-01 00:40 27 ********
1 2018-03-01 00:51 27 ********
2 2018-03-01 01:02 30 ***********
3 2018-03-01 01:13 30 ***********
4 2018-03-01 01:24 32 *************
5 2018-03-01 01:35 30 ***********
6 2018-03-01 01:46 29 **********
7 2018-03-01 01:57 30 ***********
8 2018-03-01 02:08 31 ************
... ..( 3 skipped). .. ************
12 2018-03-01 02:52 31 ************
13 2018-03-01 03:03 30 ***********
... ..( 4 skipped). .. ***********
18 2018-03-01 03:58 30 ***********
19 2018-03-01 04:09 29 **********
20 2018-03-01 04:20 29 **********
21 2018-03-01 04:31 30 ***********
22 2018-03-01 04:42 30 ***********
23 2018-03-01 04:53 29 **********
24 2018-03-01 05:04 29 **********
25 2018-03-01 05:15 30 ***********
26 2018-03-01 05:26 29 **********
27 2018-03-01 05:37 30 ***********
28 2018-03-01 05:48 30 ***********
29 2018-03-01 05:59 30 ***********
30 2018-03-01 06:10 29 **********
31 2018-03-01 06:21 30 ***********
32 2018-03-01 06:32 ? -
33 2018-03-01 06:43 29 **********
34 2018-03-01 06:54 31 ************
35 2018-03-01 07:05 31 ************
36 2018-03-01 07:16 31 ************
37 2018-03-01 07:27 30 ***********
38 2018-03-01 07:38 29 **********
39 2018-03-01 07:49 29 **********
40 2018-03-01 08:00 30 ***********
41 2018-03-01 08:11 30 ***********
42 2018-03-01 08:22 ? -
43 2018-03-01 08:33 19 -
44 2018-03-01 08:44 24 *****
45 2018-03-01 08:55 27 ********
46 2018-03-01 09:06 27 ********
47 2018-03-01 09:17 28 *********
... ..( 2 skipped). .. *********
50 2018-03-01 09:50 28 *********
51 2018-03-01 10:01 27 ********
52 2018-03-01 10:12 28 *********
53 2018-03-01 10:23 28 *********
54 2018-03-01 10:34 29 **********
... ..( 5 skipped). .. **********
60 2018-03-01 11:40 29 **********
61 2018-03-01 11:51 30 ***********
SCT Error Recovery Control command not supported
Device Statistics (GP Log 0x04)
Page Offset Size Value Flags Description
0x01 ===== = = === == General Statistics (rev 1) ==
0x01 0x008 4 36 --- Lifetime Power-On Resets
0x01 0x010 4 98 --- Power-on Hours
0x01 0x018 6 345425630 --- Logical Sectors Written
0x01 0x020 6 1518895 --- Number of Write Commands
0x01 0x028 6 272235415 --- Logical Sectors Read
0x01 0x030 6 1744496 --- Number of Read Commands
0x01 0x038 6 - --- Date and Time TimeStamp
0x03 ===== = = === == Rotating Media Statistics (rev 1) ==
0x03 0x008 4 97 --- Spindle Motor Power-on Hours
0x03 0x010 4 1 --- Head Flying Hours
0x03 0x018 4 7185 --- Head Load Events
0x03 0x020 4 0 --- Number of Reallocated Logical Sectors
0x03 0x028 4 0 --- Read Recovery Attempts
0x03 0x030 4 0 --- Number of Mechanical Start Failures
0x03 0x038 4 0 --- Number of Realloc. Candidate Logical Sectors
0x04 ===== = = === == General Errors Statistics (rev 1) ==
0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors
0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion
|||_ C monitored condition met
||__ D supports DSN
|___ N normalized value
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x000a 2 3 Device-to-host register FISes sent due to a COMRESET
0x0001 2 0 Command failed due to ICRC error
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
More information about the Smartmontools-database
mailing list