[Smartmontools-database] ADATA SP900NS34
Andrey Ponomarenko
andrewponomarenko at yandex.ru
Fri Jun 15 08:52:19 CEST 2018
Please add drive: https://github.com/linuxhw/SMART/tree/master/SSD/ADATA/SP900/SP900NS34%20128GB
=== START OF INFORMATION SECTION ===
Device Model: ADATA SP900NS34
Serial Number: --
LU WWN Device Id: 0 000000 ...
Firmware Version: 5.8.2
User Capacity: 128,035,676,160 bytes [128 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: ACS-2 T13/2015-D revision 3
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Tue Apr 19 12:23:19 2016 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM level is: 254 (maximum performance)
Rd look-ahead is: Unavailable
Write cache is: Enabled
ATA Security is: Disabled, frozen [SEC2]
Wt Cache Reorder: Unavailable
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x02) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 0) seconds.
Offline data collection
capabilities: (0x7d) SMART execute Offline immediate.
No Auto Offline data collection support.
Abort Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 48) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x0025) SCT Status supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate -O--CK 120 120 050 - 0
5 Reallocated_Sector_Ct PO--CK 100 100 003 - 0
9 Power_On_Hours -O--CK 100 100 000 - 734 (136 240 0)
12 Power_Cycle_Count -O--CK 099 099 000 - 1528
171 Unknown_Attribute -O-R-- 100 100 000 - 0
172 Unknown_Attribute -O--CK 100 100 000 - 0
174 Unknown_Attribute ----CK 000 000 000 - 54
177 Wear_Leveling_Count ------ 000 000 000 - 98
181 Program_Fail_Cnt_Total -O-R-- 100 100 000 - 0
182 Erase_Fail_Count_Total -O--CK 100 100 000 - 0
187 Reported_Uncorrect -O--C- 100 100 000 - 0
194 Temperature_Celsius -O---K 034 069 000 - 34 (Min/Max 18/69)
195 Hardware_ECC_Recovered --SRC- 120 120 000 - 0
196 Reallocated_Event_Count PO--CK 100 100 003 - 0
201 Unknown_SSD_Attribute --SRC- 120 120 000 - 0
204 Soft_ECC_Correction --SRC- 120 120 000 - 0
230 Unknown_SSD_Attribute PO--C- 100 100 000 - 100
231 Temperature_Celsius PO--C- 097 097 010 - 4294967297
233 Media_Wearout_Indicator -O--CK 000 000 000 - 8331
234 Unknown_Attribute -O--CK 000 000 000 - 5507
241 Total_LBAs_Written -O--CK 000 000 000 - 5507
242 Total_LBAs_Read -O--CK 000 000 000 - 4490
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x04 GPL,SL R/O 16 Device Statistics log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 1 Extended self-test log
0x09 SL R/W 1 Selective self-test log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters
0x30 GPL,SL R/O 16 IDENTIFY DEVICE data log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xb7 GPL,SL VS 16 Device vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log (GP Log 0x03) not supported
SMART Error Log not supported
SMART Extended Self-test Log Version: 1 (1 sectors)
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 733 -
# 2 Short offline Completed without error 00% 732 -
# 3 Short offline Interrupted (host reset) 10% 726 -
# 4 Short offline Completed without error 00% 720 -
# 5 Short offline Completed without error 00% 706 -
# 6 Short offline Completed without error 00% 693 -
# 7 Short offline Completed without error 00% 689 -
# 8 Short offline Completed without error 00% 668 -
# 9 Short offline Completed without error 00% 655 -
#10 Short offline Completed without error 00% 642 -
#11 Short offline Completed without error 00% 634 -
#12 Short offline Completed without error 00% 607 -
#13 Short offline Completed without error 00% 586 -
#14 Short offline Completed without error 00% 581 -
#15 Short offline Completed without error 00% 577 -
#16 Short offline Completed without error 00% 572 -
#17 Short offline Completed without error 00% 564 -
#18 Short offline Completed without error 00% 551 -
#19 Short offline Completed without error 00% 540 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 3
SCT Version (vendor specific): 0 (0x0000)
SCT Support Level: 1
Device State: Active (0)
Current Temperature: 34 Celsius
Power Cycle Min/Max Temperature: 18/69 Celsius
Lifetime Min/Max Temperature: 18/78 Celsius
Under/Over Temperature Limit Count: 0/0
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 10 minutes
Min/Max recommended Temperature: 0/85 Celsius
Min/Max Temperature Limit: 0/89 Celsius
Temperature History Size (Index): 478 (235)
SCT Error Recovery Control command not supported
Device Statistics (GP Log 0x04)
Page Offset Size Value Description
1 ===== = = == General Statistics (rev 2) ==
1 0x008 4 1528 Lifetime Power-On Resets
1 0x010 4 734 Power-on Hours
1 0x018 6 11800899992 Logical Sectors Written
1 0x028 6 9668856864 Logical Sectors Read
4 ===== = = == General Errors Statistics (rev 1) ==
4 0x008 4 75 Number of Reported Uncorrectable Errors
4 0x010 4 1 Resets Between Cmd Acceptance and Completion
5 ===== = = == Temperature Statistics (rev 1) ==
5 0x008 1 34 Current Temperature
5 0x010 1 38 Average Short Term Temperature
5 0x018 1 - Average Long Term Temperature
5 0x020 1 67 Highest Temperature
5 0x028 1 23 Lowest Temperature
5 0x030 1 48 Highest Average Short Term Temperature
5 0x038 1 38 Lowest Average Short Term Temperature
5 0x040 1 - Highest Average Long Term Temperature
5 0x048 1 - Lowest Average Long Term Temperature
5 0x050 4 0 Time in Over-Temperature
5 0x058 1 85 Specified Maximum Operating Temperature
5 0x060 4 0 Time in Under-Temperature
5 0x068 1 0 Specified Minimum Operating Temperature
6 ===== = = == Transport Statistics (rev 1) ==
6 0x008 4 0 Number of Hardware Resets
6 0x010 4 230 Number of ASR Events
6 0x018 4 0 Number of Interface CRC Errors
7 ===== = = == Solid State Device Statistics (rev 1) ==
7 0x008 1 2 Percentage Used Endurance Indicator
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 2 0 Command failed due to ICRC error
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
0x0008 2 0 Device-to-host non-data FIS retries
0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy
0x000a 2 2 Device-to-host register FISes sent due to a COMRESET
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC
0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC
0x0002 2 0 R_ERR response for data FIS
0x0005 2 0 R_ERR response for non-data FIS
0x000b 2 0 CRC errors within host-to-device FIS
0x000d 2 0 Non-CRC errors within host-to-device FIS
More information about the Smartmontools-database
mailing list