[Smartmontools-database] Missing Western Digital USB ID (1058:1078) and info ...

[C.Lee Taylor]

lsusb
Bus 002 Device 007: ID 1058:1078 Western Digital Technologies, Inc.
Bus 002 Device 006: ID 1058:1078 Western Digital Technologies, Inc.


smartctl -i -a /dev/sda
smartctl 6.5 2016-01-24 r4214 [x86_64-linux-4.4.0-112-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

/dev/sda: Unknown USB bridge [0x1058:0x1078 (0x1065)]
Please specify device type with the -d option.



smartctl -i -a -d sat /dev/sda
smartctl 6.5 2016-01-24 r4214 [x86_64-linux-4.4.0-112-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Western Digital Elements / My Passport (USB, AF)
Device Model:     WDC WD10JMVW-11AJGS3
Serial Number:    WD-WX61A64LCP73
LU WWN Device Id: 5 0014ee 604bf5fd1
Firmware Version: 01.01A01
User Capacity:    1,000,204,886,016 bytes [1.00 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    5400 rpm
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ACS-2 (minor revision not indicated)
SATA Version is:  SATA 3.0, 3.0 Gb/s (current: 3.0 Gb/s)
Local Time is:    Fri Feb 23 13:18:49 2018 SAST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0) The previous self-test routine
completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (18420) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: (   2) minutes.
Extended self-test routine
recommended polling time: ( 206) minutes.
Conveyance self-test routine
recommended polling time: (   5) minutes.
SCT capabilities:        (0x7035) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED
WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x002f   200   200   051    Pre-fail  Always
   -       0
  3 Spin_Up_Time            0x0027   125   125   021    Pre-fail  Always
   -       4741
  4 Start_Stop_Count        0x0032   098   098   000    Old_age   Always
   -       2690
  5 Reallocated_Sector_Ct   0x0033   200   200   140    Pre-fail  Always
   -       0
  7 Seek_Error_Rate         0x002e   200   200   000    Old_age   Always
   -       0
  9 Power_On_Hours          0x0032   065   065   000    Old_age   Always
   -       25837
 10 Spin_Retry_Count        0x0032   100   100   000    Old_age   Always
   -       0
 11 Calibration_Retry_Count 0x0032   100   253   000    Old_age   Always
   -       0
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always
   -       69
192 Power-Off_Retract_Count 0x0032   200   200   000    Old_age   Always
   -       29
193 Load_Cycle_Count        0x0032   171   171   000    Old_age   Always
   -       87909
194 Temperature_Celsius     0x0022   120   090   000    Old_age   Always
   -       27
196 Reallocated_Event_Count 0x0032   200   200   000    Old_age   Always
   -       0
197 Current_Pending_Sector  0x0032   200   200   000    Old_age   Always
   -       0
198 Offline_Uncorrectable   0x0030   100   253   000    Old_age   Offline
    -       0
199 UDMA_CRC_Error_Count    0x0032   200   200   000    Old_age   Always
   -       0
200 Multi_Zone_Error_Rate   0x0008   100   253   000    Old_age   Offline
    -       0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
No self-tests have been logged.  [To run self-tests, use: smartctl -t]

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://listi.jpberlin.de/pipermail/smartmontools-database/attachments/20180223/11e96023/attachment.html>