[Smartmontools-database] database add: WDC WD10S21X-24R1BT0-SSHD-8GB
Jacek Bronk
yoshibz at gmail.com
Mon Feb 19 20:08:37 CET 2018
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://listi.jpberlin.de/pipermail/smartmontools-database/attachments/20180219/6e01a0bd/attachment.html>
-------------- next part --------------
smartctl 6.6 2017-11-05 r4594 [armv7l-linux-4.9.80-1-ARCH] (local build)
Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: WDC WD10S21X-24R1BT0-SSHD-8GB
Serial Number: WD-WX51A65KXNF2
LU WWN Device Id: 5 0014ee 65b386553
Firmware Version: 03.01A02
User Capacity: 1,000,204,886,016 bytes [1,00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5400 rpm
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: ACS-2 (minor revision not indicated)
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Thu Feb 15 21:49:35 2018 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM level is: 88 (intermediate level with standby)
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, NOT FROZEN [SEC1]
Wt Cache Reorder: Unknown
=== START OF READ SMART DATA SECTION ===
SMART Status not supported: Incomplete response, ATA output registers missing
SMART overall-health self-assessment test result: PASSED
Warning: This result is based on an Attribute check.
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (17820) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 198) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SCT capabilities: (0x7035) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0
3 Spin_Up_Time POS--K 190 187 021 - 1491
4 Start_Stop_Count -O--CK 097 097 000 - 3007
5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0
7 Seek_Error_Rate POSR-K 200 200 051 - 0
9 Power_On_Hours -O--CK 100 100 000 - 161
10 Spin_Retry_Count -O--CK 100 100 000 - 0
11 Calibration_Retry_Count -O--CK 100 253 000 - 0
12 Power_Cycle_Count -O--CK 100 100 000 - 16
192 Power-Off_Retract_Count -O--CK 200 200 000 - 12
193 Load_Cycle_Count -O--CK 199 199 000 - 4969
194 Temperature_Celsius -O---K 105 095 000 - 42
196 Reallocated_Event_Count -O--CK 200 200 000 - 0
197 Current_Pending_Sector -O--CK 200 200 000 - 0
198 Offline_Uncorrectable ----CK 100 253 000 - 0
199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0
200 Multi_Zone_Error_Rate ---R-- 100 253 000 - 0
240 Head_Flying_Hours -O--CK 100 100 000 - 28
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 5 Comprehensive SMART error log
0x03 GPL R/O 6 Ext. Comprehensive SMART error log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 1 Extended self-test log
0x09 SL R/W 1 Selective self-test log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x12 GPL R/O 1 SATA NCQ Non-Data log
0x13 GPL R/O 1 SATA NCQ Send and Receive log
0x14 GPL R/O 1 Hybrid Information log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xa0-0xa7 GPL,SL VS 16 Device vendor specific log
0xa8-0xb6 GPL,SL VS 1 Device vendor specific log
0xb7 GPL,SL VS 38 Device vendor specific log
0xbd GPL,SL VS 1 Device vendor specific log
0xc0 GPL,SL VS 1 Device vendor specific log
0xc1 GPL VS 93 Device vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (6 sectors)
No Errors Logged
SMART Extended Self-test Log Version: 1 (1 sectors)
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 3
SCT Version (vendor specific): 258 (0x0102)
SCT Support Level: 1
Device State: Active (0)
Current Temperature: 42 Celsius
Power Cycle Min/Max Temperature: 24/51 Celsius
Lifetime Min/Max Temperature: 24/52 Celsius
Lifetime Average Temperature: 36 Celsius
Under/Over Temperature Limit Count: 0/0
Vendor specific:
01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 1 minute
Min/Max recommended Temperature: 0/60 Celsius
Min/Max Temperature Limit: -41/85 Celsius
Temperature History Size (Index): 128 (104)
Index Estimated Time Temperature Celsius
105 2018-02-15 19:42 27 ********
... ..( 2 skipped). .. ********
108 2018-02-15 19:45 27 ********
109 2018-02-15 19:46 26 *******
... ..( 7 skipped). .. *******
117 2018-02-15 19:54 26 *******
118 2018-02-15 19:55 25 ******
... ..( 8 skipped). .. ******
127 2018-02-15 20:04 25 ******
0 2018-02-15 20:05 24 *****
... ..( 23 skipped). .. *****
24 2018-02-15 20:29 24 *****
25 2018-02-15 20:30 ? -
26 2018-02-15 20:31 24 *****
27 2018-02-15 20:32 24 *****
28 2018-02-15 20:33 ? -
29 2018-02-15 20:34 24 *****
... ..( 9 skipped). .. *****
39 2018-02-15 20:44 24 *****
40 2018-02-15 20:45 25 ******
... ..( 3 skipped). .. ******
44 2018-02-15 20:49 25 ******
45 2018-02-15 20:50 26 *******
... ..( 7 skipped). .. *******
53 2018-02-15 20:58 26 *******
54 2018-02-15 20:59 27 ********
... ..( 10 skipped). .. ********
65 2018-02-15 21:10 27 ********
66 2018-02-15 21:11 28 *********
67 2018-02-15 21:12 28 *********
68 2018-02-15 21:13 ? -
69 2018-02-15 21:14 28 *********
70 2018-02-15 21:15 28 *********
71 2018-02-15 21:16 30 ***********
72 2018-02-15 21:17 30 ***********
73 2018-02-15 21:18 ? -
74 2018-02-15 21:19 30 ***********
75 2018-02-15 21:20 30 ***********
76 2018-02-15 21:21 30 ***********
77 2018-02-15 21:22 31 ************
78 2018-02-15 21:23 32 *************
79 2018-02-15 21:24 32 *************
80 2018-02-15 21:25 35 ****************
81 2018-02-15 21:26 35 ****************
82 2018-02-15 21:27 36 *****************
83 2018-02-15 21:28 37 ******************
84 2018-02-15 21:29 37 ******************
85 2018-02-15 21:30 36 *****************
86 2018-02-15 21:31 36 *****************
87 2018-02-15 21:32 37 ******************
88 2018-02-15 21:33 38 *******************
89 2018-02-15 21:34 38 *******************
90 2018-02-15 21:35 38 *******************
91 2018-02-15 21:36 39 ********************
92 2018-02-15 21:37 39 ********************
93 2018-02-15 21:38 40 *********************
... ..( 4 skipped). .. *********************
98 2018-02-15 21:43 40 *********************
99 2018-02-15 21:44 41 **********************
100 2018-02-15 21:45 41 **********************
101 2018-02-15 21:46 41 **********************
102 2018-02-15 21:47 42 ***********************
103 2018-02-15 21:48 42 ***********************
104 2018-02-15 21:49 42 ***********************
SCT Error Recovery Control command not supported
Device Statistics (GP/SMART Log 0x04) not supported
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 2 0 Command failed due to ICRC error
0x0002 2 0 R_ERR response for data FIS
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0005 2 0 R_ERR response for non-data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
0x0008 2 0 Device-to-host non-data FIS retries
0x0009 2 3 Transition from drive PhyRdy to drive PhyNRdy
0x000a 2 3 Device-to-host register FISes sent due to a COMRESET
0x000b 2 0 CRC errors within host-to-device FIS
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
0x8000 4 371390 Vendor specific
More information about the Smartmontools-database
mailing list