[Smartmontools-database] unrecognized drive Kingston SE50S37 480GB
J. Echter
j.echter at echter-kuechen-elektro.de
Mon Dec 3 10:49:24 CET 2018
here's the datasheet: https://www.kingston.com/datasheets/SE50S37_us.pdf
-------------- next part --------------
smartctl 5.43 2016-09-28 r4347 [x86_64-linux-2.6.32-754.6.3.el6.x86_64] (local build)
Copyright (C) 2002-12 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF INFORMATION SECTION ===
Device Model: KINGSTON SE50S37480G
Serial Number: 50026B7266013AAC
LU WWN Device Id: 5 0026b7 266013aac
Firmware Version: 61AABBF0
User Capacity: 480.103.981.056 bytes [480 GB]
Sector Size: 512 bytes logical/physical
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: 8
ATA Standard is: ACS-2 revision 3
Local Time is: Mon Dec 3 10:47:54 2018 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM level is: 254 (maximum performance)
Rd look-ahead is: Disabled
Write cache is: Enabled
ATA Security is: Disabled, frozen [SEC2]
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x02) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 0) seconds.
Offline data collection
capabilities: (0x7d) SMART execute Offline immediate.
No Auto Offline data collection support.
Abort Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 48) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x0025) SCT Status supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate PO--CK 108 108 050 - 18742424
5 Reallocated_Sector_Ct PO--CK 100 100 003 - 0
9 Power_On_Hours -O--CK 090 090 000 - 8793 (137 180 0)
12 Power_Cycle_Count -O--CK 100 100 000 - 41
13 Read_Soft_Error_Rate -O--CK 086 086 000 - 1125300173976
100 Unknown_Attribute -O--CK 000 000 000 - 5444
170 Unknown_Attribute -O--CK 000 000 000 - 13568
171 Unknown_Attribute -O-R-- 100 100 000 - 0
172 Unknown_Attribute -O--CK 100 100 000 - 0
174 Unknown_Attribute ----CK 000 000 000 - 36
177 Wear_Leveling_Count ------ 000 000 000 - 1
181 Program_Fail_Cnt_Total -O-R-- 100 100 000 - 0
182 Erase_Fail_Count_Total -O--CK 100 100 000 - 0
184 End-to-End_Error -O--CK 100 100 090 - 0
187 Reported_Uncorrect -O--C- 100 100 000 - 0
194 Temperature_Celsius -O---K 032 043 000 - 32 (Min/Max 17/43)
195 Hardware_ECC_Recovered --SRC- 120 120 000 - 18742424
196 Reallocated_Event_Count PO--CK 100 100 003 - 0
198 Offline_Uncorrectable ----C- 120 120 000 - 277729765228544
199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0
201 Soft_Read_Error_Rate --SRC- 120 120 000 - 18742424
204 Soft_ECC_Correction --SRC- 120 120 000 - 18742424
230 Head_Amplitude PO--C- 100 100 000 - 0
231 Temperature_Celsius ------ 100 100 011 - 77309411328
232 Available_Reservd_Space -O--CK 000 000 000 - 53
233 Media_Wearout_Indicator -O--CK 000 000 000 - 5658
234 Unknown_Attribute -O--CK 000 000 000 - 13463
235 Unknown_Attribute PO--CK 100 100 002 - 0
241 Total_LBAs_Written -O--CK 000 000 000 - 13463
242 Total_LBAs_Read -O--CK 000 000 000 - 12944
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
GP/S Log at address 0x00 has 1 sectors [Log Directory]
GP Log at address 0x03 has 16 sectors [Ext. Comprehensive SMART error log]
GP/S Log at address 0x04 has 6 sectors [Device Statistics log]
SMART Log at address 0x06 has 1 sectors [SMART self-test log]
GP Log at address 0x07 has 1 sectors [Extended self-test log]
SMART Log at address 0x09 has 1 sectors [Selective self-test log]
GP Log at address 0x10 has 1 sectors [NCQ Command Error log]
GP Log at address 0x11 has 1 sectors [SATA Phy Event Counters]
GP/S Log at address 0x80 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x81 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x82 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x83 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x84 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x85 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x86 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x87 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x88 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x89 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x8a has 16 sectors [Host vendor specific log]
GP/S Log at address 0x8b has 16 sectors [Host vendor specific log]
GP/S Log at address 0x8c has 16 sectors [Host vendor specific log]
GP/S Log at address 0x8d has 16 sectors [Host vendor specific log]
GP/S Log at address 0x8e has 16 sectors [Host vendor specific log]
GP/S Log at address 0x8f has 16 sectors [Host vendor specific log]
GP/S Log at address 0x90 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x91 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x92 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x93 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x94 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x95 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x96 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x97 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x98 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x99 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x9a has 16 sectors [Host vendor specific log]
GP/S Log at address 0x9b has 16 sectors [Host vendor specific log]
GP/S Log at address 0x9c has 16 sectors [Host vendor specific log]
GP/S Log at address 0x9d has 16 sectors [Host vendor specific log]
GP/S Log at address 0x9e has 16 sectors [Host vendor specific log]
GP/S Log at address 0x9f has 16 sectors [Host vendor specific log]
GP/S Log at address 0xa8 has 16 sectors [Device vendor specific log]
GP/S Log at address 0xb7 has 16 sectors [Device vendor specific log]
GP/S Log at address 0xe0 has 1 sectors [SCT Command/Status]
GP/S Log at address 0xe1 has 1 sectors [SCT Data Transfer]
SMART Extended Comprehensive Error Log Version: 1 (16 sectors)
No Errors Logged
SMART Extended Self-test Log Version: 1 (1 sectors)
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 8793 -
# 2 Short offline Completed without error 00% 8552 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 3
SCT Version (vendor specific): 0 (0x0000)
SCT Support Level: 1
Device State: Active (0)
Current Temperature: 32 Celsius
Power Cycle Min/Max Temperature: 17/43 Celsius
Lifetime Min/Max Temperature: 17/43 Celsius
Under/Over Temperature Limit Count: 0/0
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 10 minutes
Min/Max recommended Temperature: 0/70 Celsius
Min/Max Temperature Limit: 0/85 Celsius
Temperature History Size (Index): 478 (109)
Index Estimated Time Temperature Celsius
110 2018-11-30 03:10 32 *************
111 2018-11-30 03:20 32 *************
112 2018-11-30 03:30 31 ************
... ..( 94 skipped). .. ************
207 2018-11-30 19:20 31 ************
208 2018-11-30 19:30 32 *************
... ..( 2 skipped). .. *************
211 2018-11-30 20:00 32 *************
212 2018-11-30 20:10 33 **************
213 2018-11-30 20:20 32 *************
214 2018-11-30 20:30 32 *************
215 2018-11-30 20:40 31 ************
216 2018-11-30 20:50 32 *************
217 2018-11-30 21:00 31 ************
... ..( 2 skipped). .. ************
220 2018-11-30 21:30 31 ************
221 2018-11-30 21:40 32 *************
222 2018-11-30 21:50 31 ************
... ..( 19 skipped). .. ************
242 2018-12-01 01:10 31 ************
243 2018-12-01 01:20 32 *************
244 2018-12-01 01:30 31 ************
... ..(110 skipped). .. ************
355 2018-12-01 20:00 31 ************
356 2018-12-01 20:10 32 *************
357 2018-12-01 20:20 31 ************
... ..( 17 skipped). .. ************
375 2018-12-01 23:20 31 ************
376 2018-12-01 23:30 30 ***********
377 2018-12-01 23:40 31 ************
378 2018-12-01 23:50 30 ***********
... ..( 3 skipped). .. ***********
382 2018-12-02 00:30 30 ***********
383 2018-12-02 00:40 31 ************
384 2018-12-02 00:50 30 ***********
... ..( 26 skipped). .. ***********
411 2018-12-02 05:20 30 ***********
412 2018-12-02 05:30 ? -
413 2018-12-02 05:40 31 ************
414 2018-12-02 05:50 30 ***********
415 2018-12-02 06:00 30 ***********
416 2018-12-02 06:10 30 ***********
417 2018-12-02 06:20 31 ************
... ..( 24 skipped). .. ************
442 2018-12-02 10:30 31 ************
443 2018-12-02 10:40 30 ***********
... ..( 18 skipped). .. ***********
462 2018-12-02 13:50 30 ***********
463 2018-12-02 14:00 31 ************
... ..(110 skipped). .. ************
96 2018-12-03 08:30 31 ************
97 2018-12-03 08:40 ? -
98 2018-12-03 08:50 32 *************
... ..( 10 skipped). .. *************
109 2018-12-03 10:40 32 *************
Warning: device does not support SCT Error Recovery Control command
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 2 0 Command failed due to ICRC error
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
0x0008 2 0 Device-to-host non-data FIS retries
0x0009 2 4 Transition from drive PhyRdy to drive PhyNRdy
0x000a 2 5 Device-to-host register FISes sent due to a COMRESET
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC
0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC
0x0002 2 0 R_ERR response for data FIS
0x0005 2 0 R_ERR response for non-data FIS
0x000b 2 0 CRC errors within host-to-device FIS
0x000d 2 0 Non-CRC errors within host-to-device FIS
More information about the Smartmontools-database
mailing list