[Smartmontools-database] Missing HD in Database
root
beowulf_team at nist.gov
Fri Nov 10 00:59:29 CET 2017
smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.10.0-514.26.2.el7.x86_64] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: TOSHIBA MG04ACA300E
Firmware Version: FP3B
User Capacity: 3,000,592,982,016 bytes [3.00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 7200 rpm
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: ATA8-ACS (minor revision not indicated)
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Thu Nov 9 18:40:04 2017 EST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM level is: 128 (minimum power consumption without standby)
Rd look-ahead is: Enabled
Write cache is: Enabled
ATA Security is: Disabled, frozen [SEC2]
Wt Cache Reorder: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 120) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 357) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0
2 Throughput_Performance P-S--- 100 100 050 - 0
3 Spin_Up_Time POS--K 100 100 001 - 5025
4 Start_Stop_Count -O--CK 100 100 000 - 12
5 Reallocated_Sector_Ct PO--CK 100 100 050 - 0
7 Seek_Error_Rate PO-R-- 100 100 050 - 0
8 Seek_Time_Performance P-S--- 100 100 050 - 0
9 Power_On_Hours -O--CK 095 095 000 - 2372
10 Spin_Retry_Count PO--CK 100 100 030 - 0
12 Power_Cycle_Count -O--CK 100 100 000 - 12
191 G-Sense_Error_Rate -O--CK 100 100 000 - 3
192 Power-Off_Retract_Count -O--CK 100 100 000 - 5
193 Load_Cycle_Count -O--CK 100 100 000 - 65
194 Temperature_Celsius -O---K 100 100 000 - 25 (Min/Max 15/33)
196 Reallocated_Event_Count -O--CK 100 100 000 - 0
197 Current_Pending_Sector -O--CK 100 100 000 - 0
198 Offline_Uncorrectable ----CK 100 100 000 - 0
199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0
220 Disk_Shift -O---- 100 100 000 - 0
222 Loaded_Hours -O--CK 097 097 000 - 1558
223 Load_Retry_Count -O--CK 100 100 000 - 0
224 Load_Friction -O---K 100 100 000 - 0
226 Load-in_Time -OS--K 100 100 000 - 298
240 Head_Flying_Hours P----- 100 100 001 - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 51 Comprehensive SMART error log
0x03 GPL R/O 64 Ext. Comprehensive SMART error log
0x04 GPL,SL R/O 8 Device Statistics log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 1 Extended self-test log
0x08 GPL R/O 2 Power Conditions log
0x09 SL R/W 1 Selective self-test log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters
0x24 GPL R/O 12288 Current Device Internal Status Data log
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xa7 GPL VS 8 Device vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (64 sectors)
No Errors Logged
SMART Extended Self-test Log Version: 1 (1 sectors)
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 2372 -
# 2 Short offline Completed without error 00% 2356 -
# 3 Short offline Completed without error 00% 2332 -
# 4 Short offline Completed without error 00% 2260 -
# 5 Extended offline Completed without error 00% 2242 -
# 6 Short offline Completed without error 00% 2235 -
# 7 Short offline Completed without error 00% 2211 -
# 8 Short offline Completed without error 00% 2187 -
# 9 Short offline Completed without error 00% 2163 -
#10 Short offline Completed without error 00% 2139 -
#11 Short offline Completed without error 00% 2115 -
#12 Short offline Completed without error 00% 2091 -
#13 Extended offline Completed without error 00% 2074 -
#14 Short offline Completed without error 00% 2067 -
#15 Short offline Completed without error 00% 2043 -
#16 Short offline Completed without error 00% 2019 -
#17 Short offline Completed without error 00% 1947 -
#18 Short offline Completed without error 00% 1931 -
#19 Short offline Completed without error 00% 1907 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 3
SCT Version (vendor specific): 1 (0x0001)
SCT Support Level: 1
Device State: Active (0)
Current Temperature: 25 Celsius
Power Cycle Min/Max Temperature: 15/33 Celsius
Lifetime Min/Max Temperature: 15/33 Celsius
Under/Over Temperature Limit Count: 0/0
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 1 minute
Min/Max recommended Temperature: 5/55 Celsius
Min/Max Temperature Limit: 5/55 Celsius
Temperature History Size (Index): 478 (458)
Index Estimated Time Temperature Celsius
459 2017-11-09 10:43 25 ******
... ..( 16 skipped). .. ******
476 2017-11-09 11:00 25 ******
477 2017-11-09 11:01 24 *****
0 2017-11-09 11:02 25 ******
... ..( 72 skipped). .. ******
73 2017-11-09 12:15 25 ******
74 2017-11-09 12:16 24 *****
75 2017-11-09 12:17 25 ******
... ..( 6 skipped). .. ******
82 2017-11-09 12:24 25 ******
83 2017-11-09 12:25 24 *****
84 2017-11-09 12:26 25 ******
... ..( 34 skipped). .. ******
119 2017-11-09 13:01 25 ******
120 2017-11-09 13:02 24 *****
121 2017-11-09 13:03 25 ******
... ..( 2 skipped). .. ******
124 2017-11-09 13:06 25 ******
125 2017-11-09 13:07 24 *****
126 2017-11-09 13:08 25 ******
... ..(225 skipped). .. ******
352 2017-11-09 16:54 25 ******
353 2017-11-09 16:55 24 *****
... ..( 5 skipped). .. *****
359 2017-11-09 17:01 24 *****
360 2017-11-09 17:02 25 ******
361 2017-11-09 17:03 24 *****
362 2017-11-09 17:04 24 *****
363 2017-11-09 17:05 24 *****
364 2017-11-09 17:06 25 ******
... ..( 22 skipped). .. ******
387 2017-11-09 17:29 25 ******
388 2017-11-09 17:30 24 *****
389 2017-11-09 17:31 25 ******
390 2017-11-09 17:32 25 ******
391 2017-11-09 17:33 24 *****
... ..( 2 skipped). .. *****
394 2017-11-09 17:36 24 *****
395 2017-11-09 17:37 25 ******
396 2017-11-09 17:38 25 ******
397 2017-11-09 17:39 24 *****
... ..( 55 skipped). .. *****
453 2017-11-09 18:35 24 *****
454 2017-11-09 18:36 25 ******
... ..( 3 skipped). .. ******
458 2017-11-09 18:40 25 ******
SCT Error Recovery Control:
Read: Disabled
Write: Disabled
Device Statistics (GP Log 0x04)
Page Offset Size Value Description
1 ===== = = == General Statistics (rev 2) ==
1 0x008 4 12 Lifetime Power-On Resets
1 0x010 4 2372 Power-on Hours
1 0x018 6 1257903089 Logical Sectors Written
1 0x020 6 17384020 Number of Write Commands
1 0x028 6 161781199 Logical Sectors Read
1 0x030 6 3133709 Number of Read Commands
2 ===== = = == Free-Fall Statistics (rev 1) ==
2 0x010 4 3 Overlimit Shock Events
3 ===== = = == Rotating Media Statistics (rev 1) ==
3 0x008 4 2372 Spindle Motor Power-on Hours
3 0x010 4 1558 Head Flying Hours
3 0x018 4 65 Head Load Events
3 0x020 4 0 Number of Reallocated Logical Sectors
3 0x028 4 0 Read Recovery Attempts
3 0x030 4 0 Number of Mechanical Start Failures
4 ===== = = == General Errors Statistics (rev 1) ==
4 0x008 4 0 Number of Reported Uncorrectable Errors
4 0x010 4 0 Resets Between Cmd Acceptance and Completion
5 ===== = = == Temperature Statistics (rev 1) ==
5 0x008 1 25 Current Temperature
5 0x010 1 23~ Average Short Term Temperature
5 0x018 1 23~ Average Long Term Temperature
5 0x020 1 33 Highest Temperature
5 0x028 1 15 Lowest Temperature
5 0x030 1 26~ Highest Average Short Term Temperature
5 0x038 1 20~ Lowest Average Short Term Temperature
5 0x040 1 23~ Highest Average Long Term Temperature
5 0x048 1 21~ Lowest Average Long Term Temperature
5 0x050 4 0 Time in Over-Temperature
5 0x058 1 55 Specified Maximum Operating Temperature
5 0x060 4 0 Time in Under-Temperature
5 0x068 1 5 Specified Minimum Operating Temperature
6 ===== = = == Transport Statistics (rev 1) ==
6 0x008 4 289 Number of Hardware Resets
6 0x018 4 0 Number of Interface CRC Errors
7 ===== = = == Solid State Device Statistics (rev 1) ==
|_ ~ normalized value
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 4 0 Command failed due to ICRC error
0x0002 4 0 R_ERR response for data FIS
0x0003 4 0 R_ERR response for device-to-host data FIS
0x0004 4 0 R_ERR response for host-to-device data FIS
0x0005 4 0 R_ERR response for non-data FIS
0x0006 4 0 R_ERR response for device-to-host non-data FIS
0x0007 4 0 R_ERR response for host-to-device non-data FIS
0x0008 4 0 Device-to-host non-data FIS retries
0x0009 4 60 Transition from drive PhyRdy to drive PhyNRdy
0x000a 4 60 Device-to-host register FISes sent due to a COMRESET
0x000b 4 0 CRC errors within host-to-device FIS
0x000d 4 0 Non-CRC errors within host-to-device FIS
0x000f 4 0 R_ERR response for host-to-device data FIS, CRC
0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC
0x0012 4 0 R_ERR response for host-to-device non-data FIS, CRC
0x0013 4 0 R_ERR response for host-to-device non-data FIS, non-CRC
More information about the Smartmontools-database
mailing list