[Smartmontools-database] WDC WD80EFAX-68LHPN0 (8TB EasyStore)
Andres Rojas
breakyboy at gmail.com
Wed Aug 2 09:43:04 CEST 2017
Here's the smartmontools report for the Western Digital 8TB Easy Store USB
3.0 drive.
It was tested on Debian 9.1, and required the "-d sat" option.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://listi.jpberlin.de/pipermail/smartmontools-database/attachments/20170802/b5b538e6/attachment.html>
-------------- next part --------------
smartctl 6.6 2017-05-03 r4430 [x86_64-linux-4.9.0-3-amd64] (local build)
Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: WDC WD80EFAX-68LHPN0
Firmware Version: 83.H0A83
User Capacity: 8,001,563,222,016 bytes [8.00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5400 rpm
Form Factor: 3.5 inches
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4
SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Wed Aug 2 00:20:58 2017 PDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM level is: 164 (intermediate level without standby)
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, NOT FROZEN [SEC1]
Wt Cache Reorder: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x80) Offline data collection activity
was never started.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 93) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: (1014) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 0
2 Throughput_Performance --S--- 100 100 054 - 0
3 Spin_Up_Time POS--- 100 100 024 - 0
4 Start_Stop_Count -O--C- 100 100 000 - 6
5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0
7 Seek_Error_Rate -O-R-- 100 100 067 - 0
8 Seek_Time_Performance --S--- 100 100 020 - 0
9 Power_On_Hours -O--C- 100 100 000 - 0
10 Spin_Retry_Count -O--C- 100 100 060 - 0
12 Power_Cycle_Count -O--CK 100 100 000 - 6
22 Unknown_Attribute PO---K 100 100 025 - 100
192 Power-Off_Retract_Count -O--CK 100 100 000 - 6
193 Load_Cycle_Count -O--C- 100 100 000 - 6
194 Temperature_Celsius -O---- 151 151 000 - 43 (Min/Max 25/43)
196 Reallocated_Event_Count -O--CK 100 100 000 - 0
197 Current_Pending_Sector -O---K 100 100 000 - 0
198 Offline_Uncorrectable ---R-- 100 100 000 - 0
199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 1 Comprehensive SMART error log
0x03 GPL R/O 1 Ext. Comprehensive SMART error log
0x04 GPL R/O 256 Device Statistics log
0x04 SL R/O 255 Device Statistics log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 1 Extended self-test log
0x08 GPL R/O 2 Power Conditions log
0x09 SL R/W 1 Selective self-test log
0x0c GPL R/O 5501 Pending Defects log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x12 GPL R/O 1 SATA NCQ Non-Data log
0x13 GPL R/O 1 SATA NCQ Send and Receive log
0x15 GPL,SL R/W 1 Rebuild Assist log
0x21 GPL R/O 1 Write stream error log
0x22 GPL R/O 1 Read stream error log
0x24 GPL R/O 256 Current Device Internal Status Data log
0x25 GPL R/O 256 Saved Device Internal Status Data log
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (1 sectors)
No Errors Logged
SMART Extended Self-test Log Version: 1 (1 sectors)
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 0 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 3
SCT Version (vendor specific): 256 (0x0100)
SCT Support Level: 0
Device State: Active (0)
Current Temperature: 43 Celsius
Power Cycle Min/Max Temperature: 34/43 Celsius
Lifetime Min/Max Temperature: 25/43 Celsius
Under/Over Temperature Limit Count: 0/0
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 1 minute
Min/Max recommended Temperature: 0/65 Celsius
Min/Max Temperature Limit: -40/70 Celsius
Temperature History Size (Index): 128 (58)
Index Estimated Time Temperature Celsius
59 2017-08-01 22:13 0 -
... ..( 67 skipped). .. -
127 2017-08-01 23:21 0 -
0 2017-08-01 23:22 27 ********
1 2017-08-01 23:23 28 *********
2 2017-08-01 23:24 29 **********
3 2017-08-01 23:25 29 **********
4 2017-08-01 23:26 30 ***********
5 2017-08-01 23:27 31 ************
6 2017-08-01 23:28 31 ************
7 2017-08-01 23:29 32 *************
8 2017-08-01 23:30 32 *************
9 2017-08-01 23:31 33 **************
10 2017-08-01 23:32 33 **************
11 2017-08-01 23:33 34 ***************
12 2017-08-01 23:34 34 ***************
13 2017-08-01 23:35 35 ****************
14 2017-08-01 23:36 35 ****************
15 2017-08-01 23:37 35 ****************
16 2017-08-01 23:38 36 *****************
17 2017-08-01 23:39 36 *****************
18 2017-08-01 23:40 37 ******************
19 2017-08-01 23:41 37 ******************
20 2017-08-01 23:42 37 ******************
21 2017-08-01 23:43 38 *******************
22 2017-08-01 23:44 38 *******************
23 2017-08-01 23:45 38 *******************
24 2017-08-01 23:46 39 ********************
25 2017-08-01 23:47 39 ********************
26 2017-08-01 23:48 39 ********************
27 2017-08-01 23:49 40 *********************
28 2017-08-01 23:50 40 *********************
29 2017-08-01 23:51 40 *********************
30 2017-08-01 23:52 41 **********************
31 2017-08-01 23:53 41 **********************
32 2017-08-01 23:54 34 ***************
33 2017-08-01 23:55 35 ****************
34 2017-08-01 23:56 35 ****************
35 2017-08-01 23:57 36 *****************
36 2017-08-01 23:58 36 *****************
37 2017-08-01 23:59 36 *****************
38 2017-08-02 00:00 37 ******************
39 2017-08-02 00:01 37 ******************
40 2017-08-02 00:02 38 *******************
41 2017-08-02 00:03 38 *******************
42 2017-08-02 00:04 38 *******************
43 2017-08-02 00:05 39 ********************
... ..( 2 skipped). .. ********************
46 2017-08-02 00:08 39 ********************
47 2017-08-02 00:09 40 *********************
48 2017-08-02 00:10 40 *********************
49 2017-08-02 00:11 40 *********************
50 2017-08-02 00:12 41 **********************
... ..( 2 skipped). .. **********************
53 2017-08-02 00:15 41 **********************
54 2017-08-02 00:16 42 ***********************
... ..( 2 skipped). .. ***********************
57 2017-08-02 00:19 42 ***********************
58 2017-08-02 00:20 0 -
SCT Error Recovery Control:
Read: 70 (7.0 seconds)
Write: 70 (7.0 seconds)
Device Statistics (GP/SMART Log 0x04) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 2 0 Command failed due to ICRC error
0x0002 2 0 R_ERR response for data FIS
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0005 2 0 R_ERR response for non-data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
0x0008 2 0 Device-to-host non-data FIS retries
0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy
0x000a 2 1 Device-to-host register FISes sent due to a COMRESET
0x000b 2 0 CRC errors within host-to-device FIS
0x000d 2 0 Non-CRC errors within host-to-device FIS
More information about the Smartmontools-database
mailing list